You are using an outdated browser. Please update your browser now to display the page correctly.
Delivery the next working day
Right of return 14 days
The submersible pump is suitable for domestic hot water supply and draining, e.g. in the household, in farming, horticulture and in the plumbing trade...
All product informationThe submersible pump is suitable for domestic hot water supply and draining, e.g. in the household, in farming, horticulture and in the plumbing trade. It is intended to be used for the pumping of clean water from high depth with a maximum temperature of 35 °C. The integrated float switch activates the pump if water is needed and automatically switches off again after that. This is energy-saving and preserving at the same time. It is also equipped with a thermal circuit breaker which protects the motor against overheat.
The water to be pumped should not contain any foreign particles larger than 1 mm.
For more information see Downloads
OEG no. | 824000020 |
Immersion depth [m]: | 7 |
Delivery head [m]: | 40 |
Housing: | Stainless steel |
Output [W]: | 1,000 |
Voltage [V]: | 230 V ~ |
Delivery rate [m³/h]: | 5.5 |
Connection: | 1" IT x 1" hose nozzle |
Protection type [IP]: | X8 |
Grain size: | 1 mm |
Diameter [mm]: | 155 |
Manufacturer | OEG |
EAN | 4055668025373 |
Weight [kg] | 3.6 |
Notes |
|
Customs tariff number | 84137029 (CN) |
Raccordement: 1'' FF x embout de tuyau 1''
Guten Tag,
die Mindesteintauchtiefe beträgt 300 mm für die automatische Steuerung und ohne die automatisch Steuerung beträgt Sie 25 mm.
Mit freundlichen Grüßen
Guten Tag,
uns stehen leider keine Kennlinien zur Verfügung.
Mit freundlichen Grüßen
Guten Tag,
die Tauchpumpe wiegt 9,2 Kg.
Mit freundlichen Grüßen
Guten Tag,
Die Höhe beträgt 385 mm und der Durchmesser beträgt 160 mm. Wenn der Schwimmer vollständig gegen die Pumpe gedrückt wurde (aber dann nicht funktioniert, weil er sich nicht bewegen kann), beträgt er 220 mm.
Mit freundlichen Grüßen
Bonjour,
Le câble a une longueur de 10 mètres
Bonjour,
Le diamètre est de 160 mm, si le flotteur était pressé complètement contre la pompe (mais alors il ne fonctionne pas car il ne peut pas bouger), alors il est de 220 mm.