Afriso pressure transducer DMU 08 0 - 250 mbar output 0 - 10V

The Afriso DMU pressure transducer for electronic, continuous level measurement, e.g. in wells, drilling holes, water reservoirs, containers or in waste water systems. Suitable for the media groundwater, drinking water, waste water (with FEP-cable option), diesel fuel and heating fuel. The pressure transducer HydroFox® DMU 08 converts physical pressure into an electrical signal proportional to the pressure. The basis for sensing the pressure of Hydrofox® DMU  is a piezo-resistive silicone measuring cell.
Technical data:
- supply voltage: DC 12-36 V
- output signal: 4-20 mA, 3-conductor
- dynamic behaviour: reaction time < 10 ms
- pressure transmission liquid: silicone oil
- current input: 4-20 mA < 25 mA
- operating temperature range:
  medium: -10°C up to +70°C, ambient: -10°C up to +70°C,
  storage: -25°C up to +70°C
- accuracy of measurement: deviation charcteristics according to IEC 60770
- limit point setting (non-linearity, hysteresis, repeatability): < ± 0.5 % FSO

For more information see Downloads