Heimeier A-exact straight thermostatic valve body DN10

Thermostatic valve body with automatic flow control. The required flow rate of each radiator is set directly at the thermostat valve body A-exact. Thus, the hydraulic balancing is done with a single twist and the adjusted flow will then not be exceeded even if there is an oversupply of pressure, due to load changes in the system, e.g. neighbouring valves closing or during the morning warm-up phase.
Automatic hydraulic balancing:
- thanks to integrated flow control
Setting and forgetting:
- the pre-set flow rate will never be exceeded
Large flow range from 10 to 150 l / h:
- for various applications
Ideal for renovations:
- due to simple design and standard dimensions
Application:
HEIMEIER thermostatic valve bodies A-exact are used in 2-pipe pumped heating systems with normal to high temperature spread.
Retrofitting:
When retrofitting existing systems, the dimensions of the A-exact valve usually allow a simple replacement of the old thermostatic valves.
Technical data:
- nominal pressure: PN 10
- temperature:
  maximum operating temperature: 90°C
  minimum operating temperature: 10°C
- differential pressure:
  maximum differential pressure: 60 kPa
  minimum differential pressure: 10 - 100 i/h = 10 kPa, 100 - 150 l/h =
  15 kPa
- valve housing: corrosion-resistant gunmetal
- O-rings, valve disc: EPDM rubber
- spring: stainless steel
- thermostatic insert: brass, PPS

For more information see Downloads