Afriso leak detector, vacuum Eurovac NV in protective housing 43789

The Afriso Eurovac NV is a class I leak detector according to EN 13160 as a vacuum system for detecting leaks in double-walled or single-walled tanks with internal lining for the storage of non-flammable and flammable liquids of danger class A III (mineral oil products with flashpoint ≥ 55 ° C) and for AdBlue® (urea solution 32.5%) according to DIN 70070. Eurovac NV also allows for detection of other liquids (e.g. waste oil and hydraulic oil, grinding coolants, brake fluid and others). The generous voltage range (AC 100 - 240 V) allows a problem-free use in different countries. Eurovac is a compact leak detector in a robust housing for wall mounting with acoustic and optical warning signal. The audible alarm can be switched off with the "Acknowledge"-button. Eurovac NV maintains a vacuum in the low vacuum range of the  interstitial space of the tank. The vacuum pump is operated by an extremely economical DC motor (energy efficiency class A++) with a high starting torque. Eurovac has a switching output for additional devices (e.g. additional alarm device ZAG 01, event reporting system EMS) or for integration in factory master control systems. The running-time of the pump can be queried. It comes with three hose connections (red, white, green) for the pneumatic connection with the interstitial space of the tank. The connection sleeves are universally applicable for 4-mm and 6-mm hoses. The sinter plastic filter in the condensate trap indicates the current degree of pollution and can easily be replaced from the outside, if necessary. Electrical connection from the top or from the bottom. A 9-V battery can be optionally connected so that an alarm can be triggered in case of power failure.

Technical data:

- temperature application range:

  ambient: -5/+50° C

  In the protective housing with heating: -25°/+50° C

- supply voltage: AC 100 - 240 V

- nominal power: < 10 VA

- switching output relay contact: 1 potential-free changer

- contact load: max. 250 V, 2 A, ohmic load

- operating pressure: interstitial space: -60 up to -85 mbar

- wall mounting housing made of impact-resistant plastic (ABS)

- housing dimensions W x H x D: 202 x 230 x 70 mm

- protection type: IP30 (EN 60259)

- alarm sound: min. 70 dB(A)

- general  building inspectorate approval: Z-65.22-382