Afriso pressure-compensation device

The Afriso pressure compensation unit is used to limit pressure increases in closed pipe sections resulting from expansion caused by temperature changes. It is suitable for fuel oil pipe sections which are closed at both ends (e.g. by means of solenoid valves or check valves) and which are subject to considerable temperature differences (e.g. due to pipe heating).
For universal screw joints 8/10/12 mm.
Compensable pipe volume: max. 725 cm³can be buffered at a temperature difference of 40° C. This corresponds to the following max. line lengths (depending on the line diameter):

- max. 25.5 m pipe length for 8 x 1 mm pipe diameter
- max. 14 m pipe length for 10 x 1 mm pipe diameter
- max. 9 m pipe length for 12 x 1 mm pipe diameter

Suitable for:
	Single suction unit 1,200 kW with safety plug
	Single suction unit 1,800 kW with safety plug
	Single suction unit 600 kW with shock-proof plug
	Single suction unit 600 kW with Swiss plug
	Single suction unit 1,200 kW with Swiss plug
	Single suction unit 1,800 kW with Swiss plug

For more information see Downloads