Oil nozzle Fluidics 0.85-60 S

OEG no.: 111140643
Zoom Oil nozzle Fluidics 0.85-60 S
OEG no. : 111140643

All nozzle sizes have a primary and a secondary filter now. The filter width is adapted to the nozzle size, so that higher flow rates get a larger filter area...

All product information
Related products
Wipe 'n' Buy ®
Wipe 'n' Buy

All nozzle sizes have a primary and a secondary filter now. The filter width is adapted to the nozzle size, so that higher flow rates get a larger filter area.
The production is based on the latest technology. The nozzle heads are
manufactured and assembled as well as tested fully automatic in an enclosed cabin.
Therefore, human errors and pollution cannot be possible.
By applying only the most modern machinery and up-to-date production methods, a best possibly reproducible nozzle with lowest tolerances is built, one that is well below the given EN 293 standard.
Only Fluidics nozzles are really tested 100% regarding flowrate, spray angle and spray pattern. An especially developed sensor measures the flow rate in the shortest time possible. Spray angle and spray pattern are tested with cameras and evaluated by means of a special software at the same time.
The internal geometry has been designed in such a way that flow rates are less dependent on any changes in the oil temperature.


For more information see Downloads


OEG no. 111140643
Through-put: 0.85 USgal/h
Spray pattern: S - solid cone
Spray angle: 60°
Manufacturer Fluidics Instruments
Weight [kg] 0.03
Customs tariff number 84248970 (NL)
There are no questions available on this item yet

You have to be logged in to ask a question

Average customer assessment
Bewertungen
en 26/10/2020, 11:41:25 of: Mr Miranda edwin

super prijs / kwaliteit top

scherpe prijs voor zeer goede verstuiver.

en 11/01/2018, 20:14:44 of: Mr Olli

exenllent

Top Preis top Düse exellent

en 19/06/2016, 15:14:45 of: Mr Feld

gut

Top Produkt zu einem Top Preis 1A

In order to give a review, you have to be logged in.