Set of single-cut taps HSS 15 pieces 245004RO
OEG no.: 311838458
OEG no. : 311838458
The single-cut taps for through threads are made of high-quality HSS steel. The drills are suitable for unalloyed and low-alloyed steels up to a strength of 800 N/mm² (aluminium, brass, bronze, cast iron) or also plastics...
All product information Scope of deliveryThe single-cut taps for through threads are made of high-quality HSS steel. The drills are suitable for unalloyed and low-alloyed steels up to a strength of 800 N/mm² (aluminium, brass, bronze, cast iron) or also plastics. The thread can be cut on one operation by hand or machine. The set is supplied in an ABS plastic box with practical labelling of the sizes at the pigeon holes.
| Scope of delivery: | |||
| 1 x | twist drill DIN 338 type N HSS-G Ø 6.8 mm | ||
| 1 x | twist drill DIN 338 type N HSS-G Ø 10.2 mm | ||
| 1 x |
Twist drill HSS-G Co 5 Ø 2,5 x 57 mm |
||
| 1 x |
Twist drill HSS-G Co 5 Ø 3,3 x 65 mm |
||
| 1 x |
Twist drill HSS-G Co 5 Ø 4,2 x 75 mm |
||
| 1 x |
Twist drill HSS-G Co 5 Ø 5 x 86 mm |
||
| 1 x |
Twist drill HSS-G Co 5 Ø 8,5 x 117 mm |
||
| 1 x |
HSS single-cut tap M3 x 0.5 |
||
| 1 x |
HSS single-cut tap M4 |
||
| 1 x |
HSS single-cut tap M5 |
||
| 1 x |
HSS single-cut tap M6 |
||
| 1 x |
HSS single-cut tap M8 |
||
| 1 x |
HSS single-cut tap M10 |
||
| 1 x |
HSS single-cut tap M12 |
||
| 1 x |
Adjustable tap wrench for threaded taps M1 - M12 and 1/8"- 1/2" |
||
| Suitable for: | |||
|
Craftman's set in practical metal box | ||
For more information see Downloads
| OEG no. | 311838458 |
| Model: | Square shaft |
| Thread: | Metric DIN ISO 13 |
| Contents: | 15 pieces |
| DIN: | 352 |
| Surface: | Shiny |
| Material: | HSS |
| Cutting direction: | Right-hand cut |
| Point angle [°]: | 60 |
| Manufacturer | Ruko |
| Manufacturer number | 245004RO |
| EAN | 4007140148087 |
| Weight [kg] | 0.3 |
| Customs tariff number | 82079099 (BG) |
There are no questions available on this item yet
