Single suction unit 1,800 kW with Swiss plug

Single-line suction pump unit for pumping the heating oil from the tank to one or several burners. The set-up location of the unit is selected in the vicinity of the burners so that they can remove the calmed oil from the vessel via six individual ports.
The unit generates a vacuum of -0.95 bar and, thus, achieves a maximum delivery head of 9.5 m vertically at a possible distance of 200 m horizontally. An overfill protection device and the oil sump pan with leak detector provide for the necessary safety. The fill level protection guarantees dry-running protection. The control unit used offers extensive control options with potential-free operating and fault-message outputs as well as with an event memory.

Scope of delivery:
1 x	Fastening material
1 x	single-motor suction unit
4 x	transport bracket for floor mounting
1 x	Pump, 180 l, Suntec, AJ4 Ax 100x 4P (E2487)
1 x	Motor with pump flange, coupling, screws, 230 V, for 3/8'' pumps
1 x	Rotex coupling GS 14 for SE/SZ 200
1 x	PST AC 1.0 pump control unit
1 x	Terminal base for OEG control AC 1.0
1 x	Cover strip 2 pcs. for OEG control AC 1.0
1 x	Float switch with overflow protection EVF-80/50V000-1TFL175-SB0,6PVCSt-WHG
1 x	Float switch leakage new series BVF-80/55-V0-L60-SB-0,8PVC-WHG
1 x	Plug with cable for OEM pressure transmitter
Spare parts:
	Vacuum gauge R 1/4" axial from -1 to 0 bar
	PST AC 1.0 pump control unit
	Float switch with overflow protection EVF-80/50V000-1TFL175-SB0,6PVCSt-WHG
	Pump, 180 l, Suntec, AJ4 Ax 100x 4P (E2487)
	Motor with pump flange, coupling, screws, 230 V, for 3/8'' pumps

For more information see Downloads