Basic blind insert 6418 U

The basic blind insert is suitable for blind and roller blind drives with mechanical or electronic limit switch shut-off as well as for the operation without neutral conductor. Without an extension input.

Technical data:
Running-time: 3 min.
Rated voltage: 230 V~, + 10 % / - 10 %
Rated frequency: 50 Hz
Outputs: 2 x normally open contact
Rated current: 3 A, cos φ 0,5
Nominal power: 690 VA
Temperature range (device): 0° C up to 35° C

For control element 6430-xx-xxx
(OEG no.: 717001561, 717001613, 717001656, 717001698, 717001742, 717001787, 717001826, 717002600)
For standard timer control element 6456-101.

Note:
N-conductor connection required for operation with control element with neon lamp.
N-conductor connection may be required for operation with blind and roller blind drives with electronic limit switch-off. If no N-conductor is available, capacitor set 6498 (OEG art. no. 717001556) can be used.