Blind comfort switch insert with memory/positioning function 6419 U

The blind comfort switch insert with memory/positioning function is suitable for the manual and automatic control of roller blinds (moves to the position set using the rotary knob) as well as roller blind drives with mechanical or electronic limit switch shut-off. The insert executes the individually programmed switching commands (UP/DOWN) in a 24-hour rhythm. It is suitable for the operation without neutral conductor.

Technical data:
Rated voltage: 230 V~, + 10 % / - 10 %
Rated frequency: 50 Hz
Outputs: 2 x normally open contact
Rated current: 1.3 A, cos φ 0.5
Rated power: 300 VA
Temperature range (device): 0° C up to 35° C
Without extension input
Power reserve of 45 minutes (maintenance-free as capacitor)

Note:
Pertinent cover plates 6436-xx (OEG no. 717001562)
N-conductor connection may be required for operation with blind and roller blind drives with electronic limit switch-off. If no N-conductor is available, capacitor set 6498 can be used.
Only suitable for single unit control.