This buffer storage tank fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e...
All product information Scope of deliveryRelated products
10-year warranty
High Quality
This buffer storage tank fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e.g. many solid fuel boilers). During the operation of the heat generator, more heat is produced than the consumers can take. The excess heat heats the water of the buffer tank and is therefore stored. During later stand-still periods this heat can be retrieved, as needed.
The buffer storage tank is suitable as a primary cylinder for solar systems, heat pumps, wood- or pellet boilers and can also be used in district heating systems. Due to the additional smooth-pipe exchanger, another heat generator can be integrated, and its energy can be fed into the buffer tank additionally.
| Scope of delivery: | |||
| 1 x | buffer storage tank | ||
| 1 x | insulation | ||
For more information see Downloads
| OEG no. | 516005406 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Notes |
10-year warranty
High Quality
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 2600 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable PES fleece insulation 0.036 W/(mK) |
| Weight [kg]: | 470 |
| Total height including insulation [mm]: | 2490 |
| Diameter without insulation [mm]: | 1250 |
| Diameter with insulation [mm]: | 1450 |
| Tilt height [mm]: | 2530 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 5,90 |
| Smooth-pipe heat exchanger area top [m²]: | 4,60 |
| Smooth-pipe heat exchanger volume bottom: | 39 |
| Smooth-pipe heat exchanger volume top: | 30 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Max. immersion depth of screw-in heater [mm]: | 1300 |
Bonjour, Combien de capteurs solaires OEG 4+ je peux raccorder sur l'échangeur bas de ce ballon au maximum ? Pour une installation en France (dép 44)
Bonjour,
Le nombre de collecteurs que l'on peut accorder n'est pas si important, car il dépend uniquement de la température et de la vitesse à laquelle l'eau est chauffée dans les collecteurs et est renvoyée en conséquence pour transférer la chaleur. Mais il arrivera un moment où le ballon ou l'échangeur sera trop petit pour absorber la chaleur fournie par le haut, de sorte que de moins en moins de liquide caloporteur froid sera renvoyé dans le système, ce qui comprime énormément l'efficacité du système.