This OEG buffer storage tank A+ fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e...
All product informationRelated products
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
This OEG buffer storage tank A+ fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e.g.: many solid fuel boilers). During the operation of the heat generator, more heat is generated than is retrieved by the consumers. The excess heat then heats up the water of the buffer tank and is stored there.
During stand-still periods this heat can be retrieved later as needed.
The OEG buffer storage tank A+ is suitable as a primary cylinder for solar systems, heat pumps, wood or pellet boilers and can also be used in district heating systems.
Due to the additional smooth-pipe heat exchanger, another heat generator can be integrated and its energy can be fed into the buffer tank additionally.
For more information see Downloads
| OEG no. | 516008186 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 200 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 77 |
| Total height including insulation [mm]: | 1265 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1375 |
| Heat retaining loss according to EN 12897 [W]: | 31 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
| Real volume according to EN 12897 [l]: | 203 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection heat generator [thread]: | Rp 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 500 |
Bonjour, le ballon possède combien de sortie ? Merci d'avance.
Le ballon dispose des raccords suivants: 6x RP 1", 3x RP 1 1/2", 2 x doigt de gant Ø 6mm et 1 x thermomètre Ø 9 mm , voir la fiche technique et le plan du ballon dans les downloads
Quelle est la puissance de l'échangeur avec un delta T de 5°c
Bonjour,
Env. 9,100 kW ou 9100 watts pour un écart (delta T) de 35°C.
Cordialement,
Votre équipe OEG
You have to be logged in to ask a question
08/05/2018, 15:06:47 of: Mr MI
Bien
Bon produit je recommande, pas cher