You are using an outdated browser. Please update your browser now to display the page correctly.
Premium buffer storage tank for highest demands on heat storage and efficiency. Particularly with systems that use heat generators which achieve optimum efficiency only under full load (e.g. many solid fuel boilers)...
All product informationPremium buffer storage tank for highest demands on heat storage and efficiency. Particularly with systems that use heat generators which achieve optimum efficiency only under full load (e.g. many solid fuel boilers). While the heat generator is in operation, it generates more heat than is consumed by users. The surplus heat heats up the water in the buffer storage tank and is stored. During downtimes, this heat can later be retrieved as needed.
The OEG buffer storage tank is suitable as primary cylinder for solar systems, heat pumps, wood boilers, pellet boilers and can also be used for district heating. The auxiliary smooth tube heat exchanger allows another heat generator to be integrated and its energy to be fed into the buffer storage tank.
For more information see Downloads
| OEG no. | 516005330 |
| Tank capacity [litres]: | 800 |
| Operating mode: | bivalent |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Notes | |
| Customs tariff number | 73090059 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 211 |
| Total height including insulation [mm]: | 1930 |
| Required height for cover assembly [mm]: | 2110 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 1900 |
| Heat retaining loss according to EN 12897 [W]: | 51 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,224 |
| TÜV certificate ID: | 0000080331 |
| Real volume according to EN 12897 [l]: | 799 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 2,60 |
| Smooth-pipe heat exchanger volume bottom: | 17 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 800 |
hoeveel weegt dit vat
255 kg
Bonjour, Avez vous un document où la durée de garantie d'un ballon 300L simple échangeur est indiqué svp? Merci
Nous offrons une garantie de 10 ans , mais nous n'avons pas de document spécifique pour cela.
en quelle matière est fait l’échangeur: acier ou inox ?
en acier
Bonjour Je installe par erreur , pour un production ECH. Pouvez-vous me dire quel sont les risques ?, ci je rajoute un annode ça va aide ?
Le ballon tampon n´est pas adapté car ce ballon (pour l'eau de chauffage) n'est pas émaillé, comme par exemple le préparateur d'eau chaude. L'émaillage protège le réservoir contre la corrosion due à l'eau de chauffage.
Kan ik het spiraal voor warmwater gebruiken?
Het spiraal van een buffervat is niet geschikt voor zuurstofrijk tapwater, maar voor een gesloten circuit naar een warmteopwekker.
Neem hiervoor een verswaterboiler, deze heeft een RVS wisselaar welke geschikt is voor tapwater
Bonjour, peut-on remplacer les doigts de gant déjà présent par un doigt de gant double? (Réf : 211222200)
oui
Hallo, kan de isolatie makkelijk verwijderd en teruggeplaatst worden ? (Om door een smalle opening te geraken)
De isolatie is niet verwijderbaar, alleen de (zilveren) mantel kan eraf om eventuele beschadigingen aan de mantel te voorkomen tijdens de plaatsing van de boiler.
Bonjour, le ballon possède combien de sortie ? Merci d'avance.
Le ballon dispose des raccords suivants: 6x RP 1", 3x RP 1 1/2", 2 x doigt de gant Ø 6mm et 1 x thermomètre Ø 9 mm , voir la fiche technique et le plan du ballon dans les downloads
beste wat kost dit vat van 1000 liter met aansluitingen 2" ook een 2"spiraal zou er 2 nodig hebben wat is de levertijd
OEG produceert buffervaten speciaal op maat voor u.
Wij sturen u via mail een aanvraagformulier toe waarop u precies uw wensen kunt aangeven.
Stuur het formulier ingevuld retour naar: [email protected]
Vervolgens krijgt u een offerte.
Wanneer de prijs akkoord is maken wij een technische tekening en zodra u deze akkoord geeft zal het vat speciaal voor u worden geproduceerd. Levertijd is dan ca. 4 weken na de opdrachtbevestiging.
Graag zou ik de levertijd willen weten van dit buffervat: 516005399 (5000l met wtw)
De levertijd van dit buffervat bedraagt momenteel max. 3 weken na opdracht
Avez vous une date de réapprovisionnement pour ce produit. Dans l'attente de vous lire. Cordialement, Mr ATES
Bonjour,
Délai de production: env. 10 jours ouvrables
Bekomme ich den Speicher auch mit loser Dämmung ?
Guten Tag,
ja das ist möglich, wenden Sie sich bitte hierzu direkt an unseren Vertrieb.
Mit freundlichen Grüßen
Bonjour pourriez vous m'envoyer la fiche technique pour ces ballons ? Merci bav Porretta
Bonjour,
Vous trouvez la fiche technique dans la rubrique DOWNSLOADS.
dimensions? 400 et 500l
Bonjour,
Les dimensions sont indiquées sur la fiche technique disponible à télécharger.
Cordialement,
Votre équipe OEG
kan hier een verwarmingselement in zo ja welke=
Hier passen alle dompelverwarmers met 1 1/2" US en een maximale lengte van 1400 mm in.
Hoeveel 1.1/2" aansluitingen zitten er op dit buffervat?
Alle aansluitingen vind uw in de bedieningsinstructies onder download van deze artikel
Pouvez vous me dire quelles resistance electrique est adapté à ce ballon
Dazu passt, wie auch bereits im Online Shop angezeigt, der Heizstab mit Artikelnummer Screw-in heater 2.0 kW
Quelle est la puissance de l'échangeur avec un delta T de 5°c
Bonjour,
Env. 9,100 kW ou 9100 watts pour un écart (delta T) de 35°C.
Cordialement,
Votre équipe OEG
dimmensions
Nous vous avons envoyé un mail avec les dimensions
Dans le cas ou une chaudière réalise l'appoint en partie haute, quelle est le poucentage du volume solaire de ce ballon de 3000L ainsi que pour un ballon de 1500L ?
Nous ne comprenons pas ce que vous désirez savoir: toutes les informations en relation avec les ballons sont telechargeable sur le site www.oeg.net.
Le ballon comporte 17 entrées. Sont-elles fournies avec ders bouchons ? Merci par avance.
Bonjour,
Les bouchons ne sont pas livrés avec, mais vous pouvez les commander en plusieurs tailles.
Cordialement,
Votre équipe OEG
Bonjour, est ce que ce ballon peut être utilisé comme ballon principal dans une installation solaire.
quel est la matiere de l'echangeur
L'échangeur est en acier P235TR1.