High-quality buffer storage tank to be used for cooling and heating. To protect the surface against condensate during cooling mode, the storage tank is equipped with a special, high-grade anti-corrosion coating...
All product informationRelated products
Ideal for heat and cold storage
36 months warranty
High Quality
Delivery by forwarding agency
High-quality buffer storage tank to be used for cooling and heating. To protect the surface against condensate during cooling mode, the storage tank is equipped with a special, high-grade anti-corrosion coating. These REVERSE+ storage tanks are excellently suitable for the application in conjunction with a heat pump that is supposed to be used for heating and cooling. Since there is the danger of condensation when storage tank temperatures are low while ambient temperatures are higher, there is the need for a special protection of the system modules involved. Accordingly, the surface of the REVERSE* storage tanks is particularly protected through the coating. The high-quality OEG A+ insulation reduces the temperature losses of these storage tanks to a minimum.
For more information see Downloads
| OEG no. | 516005798 |
| Numberofsmooth-pipeheatexchangers: | 0 |
| Type: | PS 725-K |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Reverse+ |
| Notes |
Ideal for heat and cold storage
36 months warranty
High Quality
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 725 |
| Colour: | red |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | permanently bonded Armaflex insulation and removable segment insulation |
| Weight [kg]: | 162 |
| Total height including insulation [mm]: | 1930 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 1900 |
| Heat retaining loss according to EN 12897 [W]: | 48 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,152 |
| Real volume according to EN 12897 [l]: | 724 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 10 |
| tmax Ambient air [°C]: | 30 |
| Max. rel. air humidity [%]: | 80 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 800 |