Check valve 1/2" gunmetal

has a socket thread on both sides in accordance with DIN EN 10226 or DIN ISO 228. The housing is made of gunmetal, the internal parts of brass and the valve disc seal of FKM. Can be installed in a horizontal or vertical position. The valve cone is spring-loaded with an opening pressure of 40 mbar.

Suitable for: Water, mineral, heating and hydraulic oils, fuels and other non-aggressive fluids (the regulations and standards applicable to the use of these media may restrict the temperature range)

Note: The check valves are not suitable for use with pulsating flow or within a distance of 10 x pipe diameter downstream of the pump.

For more information see Downloads