OEG no. : 516008164
Related products
Due to the innovative tank-in-tank-system particularly suitable
for heating up potable water and as a support for the heating system at the same time...
Related products
10-year warranty
High Quality
Due to the innovative tank-in-tank-system particularly suitable
for heating up potable water and as a support for the heating system at the same time.
Ideal for hot water heating systems, heat pumps, condensing, oil and gas boilers, solar systems, pellet and wood boilers, fire places and block heating systems. Also ideal as an addition to already existing systems.
For more information see Downloads
| OEG no. | 516008164 |
| Fresh water alternative: | 516008233 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Notes |
10-year warranty
High Quality
|
| Customs tariff number | 73090059 |
General
| Rated volume according to EN 12897: | 1000 |
| Colour: | red |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 350 |
| Total height including insulation [mm]: | 2355 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 2410 |
| Heat retaining loss according to EN 12897 [W]: | 55 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,320 |
| Output capacity (45°C) [l]: | 315 |
| Performance indicator NL following DIN 4708: | 7 |
| Real volume according to EN 12897 [l]: | 993 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Buffet storage tank capacity (part of the actual capacity) [l]: | 787 |
| Domestic hot water tank volume (Part of the real volume) [l]: | 206 |
| pmax Domestic hot water tank [bar]: | 10 |
| tmax Domestic hot water tank [°C]: | 95 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 3,30 |
| Smooth-pipe heat exchanger volume bottom: | 21,30 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 3/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of screw-in heater [mm]: | 800 |
There are no questions available on this item yet