Control unit for electric heating element for storing excessive PV power
OEG no.: 711001262
Control unit to use excessive PV power for hot-water preparation. The unit is designed for the connection of an electric heating element with an output of maximum 3 kW and can be used for buffer and domestic water storage tanks...
All product information Scope of deliveryControl unit to use excessive PV power for hot-water preparation. The unit is designed for the connection of an electric heating element with an output of maximum 3 kW and can be used for buffer and domestic water storage tanks. Irrespective of the PV system inverter used, the control modulates the output of the heating element. Temperature sensors limit the maximum values in the storage tank.
| Scope of delivery: | |||
| 1 x | Controller | ||
| 3 x | Sensor for current measurement | ||
| 1 x | Connection cable for Modbus | ||
| 1 x | eTherm sensor | ||
| 1 x | FRP6 sensor | ||
| 2 x | Fuse | ||
| 3 x | Fastening material | ||
| 3 x | PG cable gland | ||
| 1 x | Mounting instructions | ||
For more information see Downloads
| OEG no. | 711001262 |
| Type: | eTherm S |
| Rated power [kW]: | 0 .. 3 |
| Voltage [V]: | 230 / 400 |
| Weight [kg] | 6.7 |
| Customs tariff number | 84819000 |
Question
Wie bepaalt of er overtollig PV energie beschikbaar is, of is dat een instelling op deze regeling?
Answer OEG:
De regelunit bestaat uit de regelaar met vermogensgedeelte en het meetgedeelte.
Het meetgedeelte meet de stroomsterkte direct voor de energiemeter.
Als een voldoende hoog vermogen wordt gedetecteerd, kan het overtollige vermogen worden gebruikt voor de productie van elektrisch warm water.
