You are here:
-
Print
The TF 834 oil burner safety control unit is suitable to control and monitor single-stage forced draught burners with or without oil preheater, with an oil consumption of up to 30 kg/h (tested and approved according to DIN 4787)...
Spare part for All product information
The TF 834 oil burner safety control unit is suitable to control and monitor single-stage forced draught burners with or without oil preheater, with an oil consumption of up to 30 kg/h (tested and approved according to DIN 4787). A special contact in the control unit short-circuits the thermo-switch of the oil preheater as soon as the burner is operating and the flame signal is present.Therefore interruption of the burner due to decreasing oil temperature (e.g. in case of high oil flow) can be prevented. If the control box goes into lock-out mode, the oil preheater power supply is also disconnected.
For more information see Downloads
| OEG no. | 138200045 |
| Manufacturer | Brötje-Chappee-Ideal |
| Herstellernummer | 514941 |
| Weight [kg] | 0.15 |
| Notes | |
| Customs tariff number | 85364900 |
Question
Passt dieses Steuergerät zu Brenner Brötje O41-1
Answer OEG:
Wir konnten bei unseren Recherchen feststellen, dass der Brenner einen Feuerungsautomat LMO von Siemens braucht -> Vacuum oil-priming pump OSP6000
You have to be logged in to ask a question
23/03/2017, 15:18:08 of: Mr Feld
gut
Das Steuergerät schnell und sicher eingebaut
Operating instructions (PDF)
- 0.17MB