You are using an outdated browser. Please update your browser now to display the page correctly.
Premium DHW storage tank with particularly large, double heat exchanger coil for high heat transfer in combination with heat pumps and an additional coil for an alternative heat generator.
All product informationPremium DHW storage tank with particularly large, double heat exchanger coil for high heat transfer in combination with heat pumps and an additional coil for an alternative heat generator.
For more information see Downloads
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 180 |
| Total height including insulation [mm]: | 1725 |
| Diameter with insulation [mm]: | 710 |
| Tilt height [mm]: | 1865 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 40 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,960 |
| Output capacity (45°C) [l]: | 628 |
| Performance indicator NL following DIN 4708: | 13 |
| Real volume according to EN 12897 [l]: | 412 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,30 |
| Smooth-pipe heat exchanger area top [m²]: | 4,04 |
| Smooth-pipe heat exchanger volume bottom: | 8,40 |
| Smooth-pipe heat exchanger volume top: | 26 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 540 |
| Max. immersion depth of screw-in heater [mm]: | 440 |
Wanneer u op onze Website het artikelnummer ingeeft (DHW storage tank 400 l with 2 smooth-pipe heat exchangers) dan ziet u onder de de eerste tekst
"alle productinformatie" staan.
Wanneer u daarop klikt scrollt u naar de meest relevante gegevens van het product.
Onder de tweede tekst ziet u "downloads" waar u alle beschikbare technische informatie kunt downloaden van het betreffende artikel.
Neem in dat geval de warmtepompboiler 500 liter: DHW storage tank 500 l with 2 smooth-pipe heat exchangers
Hier kan eventueel ook nog een elektrisch verwamingselement in (flens aansluiting, verkrijgbaar van 2kW tot 10kW)
Veuillez consulter la fiche technique dans les downloads
Helaas niet.
We kunnen geen informatie geven over de exacte prestaties van de warmtewisselaars, omdat we niet over de benodigde informatie beschikken.
Een harde KW-hoeveelheid kan niet worden opgegeven omdat te veel parameters deze specificatie kunnen beïnvloeden. Wij werken met de stortcapaciteiten (zonder naverwarming). Bij een boilertemperatuur van 65°C met een retour van 10°C kan 628 liter onttrokken van 45°C.
Goedemorgen,
Nee, deze kunt u er los bij kopen, een flensverwarmer mag een maximale dompeldiepte van 540 mm en een 1 1/2" inschroefbaar dompelverwarmingselement mag een maximale dompeldiepte van 500 mm hebben.
bonjour Pour les ballon OEG 300litres pour pompe a chaleur ref 516005190, y a t'il la possibilité de rajouter une résistance d'appoint, et si oui a quel endroit Je n'arrive pas a trouver la doc technique Merci
Bonjour,
Oui, vous avez la possibilité de raccorder une résistance sur le piquage M ou N.
DE ERP Label van deze boiler is A+
Goedemiddag, de boiler kan worden gebruikt voor warmwatertoevoer met elke warmtepomp. Een magnesiumanode is reeds in de boiler geïnstalleerd, maar moet op vaste intervallen worden gecontroleerd en indien nodig worden vervangen. Een stroomanode wordt aanbevolen.
Un échangeur thermique n'a aucune puissance. Cela dépend la température amenée et la température de l'eau rechauffée.
Bonjour,
Vous trouverez toutes ces informations dans les documentations à télécharger.
Cordialement,
Votre équipe OEG
Bonjour,
La surface de l'échangeur thermique à tube lisse = surface en bas / en haut (m²) est de 1,3 / 2,6.
Cette information se trouve également sur la documentation technique.
Cordialement,
Votre équipe OEG