You are here:
-
Print
Frost protection thermostat Alre JTF-1 E6090301
OEG no.: 211204350
For measuring the temperature of non-aggressive gases. When fixing the capillary tube, mounting brackets JZ-05 / 6 M (metal) or JZ-05 / 6 K (plastic) should be used upstream of the heating coil. The...
All product informationFor measuring the temperature of non-aggressive gases. When fixing the capillary tube, mounting brackets JZ-05 / 6 M (metal) or JZ-05 / 6 K (plastic) should be used upstream of the heating coil. The capillary tube is active along its entire length. The device responds when approx. 30 cm of the capillary reaches the set scale value. The controller housing must be mounted in such a way that it is not exposed to a temperature lower than the set scale value.
Note:
Mounting brackets, immersion sleeves and protective coils
are not included in the scope of delivery and must be ordered separately!
For more information see Downloads
| OEG no. | 211204350 |
| Design: | Surface-mounted unit |
| Medium : | Neutral gases |
| Switch contact: | Changeover |
| Control range [°C]: | -10 .. 12 |
| Mounting type: | Wall |
| Protection type [IP]: |
 IP40 
|
| Standard: | DIN EN 60730 |
| Colour: |
 Grey 
|
| Sensor type: | Capillary tube, Cu |
| Switching differential [K]: | 1 |
| Voltage [V]: | 24 .. 230 AC |
| Frequency: | 50 Hz |
| Ambient temperature [°C]: | -10 .. 55 |
| Manufacturer | Alre-IT |
| Manufacturer number | E6090301 |
| Also replaces |
|
| Weight [kg] | 0.65 |
| Customs tariff number | 90321080 (EEC) |
There are no questions available on this item yet
