You are here:
-
Print
Frost protection thermostat JTF-1 / 12 E6090328
OEG no.: 211204360
Frost protection thermostat for hot-water heating coils.
This single-stage frost protection thermostat reliably protects hot-water heating coils from frost damage, making it ideal for use in central heating systems...
All product informationFrost protection thermostat for hot-water heating coils.
This single-stage frost protection thermostat reliably protects hot-water heating coils from frost damage, making it ideal for use in central heating systems. With a capillary length of 12 metres, it is particularly suitable for larger systems or longer routing distances.
Depending on the temperature detected by the thermostat sensor, the heating elements are switched on or off. External setpoint adjustment allows for quick on-site fine-tuning, and the intrinsically safe design with sealable setting ensures maximum safety during installation.
In this way, you can efficiently safeguard trouble-free operation even in cold conditions.
For more information see Downloads
| OEG no. | 211204360 |
| Primary function: | Heating, Cooling |
| Sensor type: | Capillary tube, Cu |
| Capillary length [mm]: | 12,000 |
| Medium : | Neutral gases, Air |
| Switch contact: | Changeover |
| Switching differential [K]: | 1 |
| Switching capacity [W]: | 3,450 |
| Voltage [V]: | 24 .. 230 AC |
| Frequency: | 50 Hz |
| Control range [°C]: | -10 .. 12 |
| Ambient temperature [°C]: | -10 .. 55 |
| Mounting type: | Wall |
| Type of connection: | Screw clamps |
| Length x Width x Height [mm]: | 105 x 55 x 112 |
| Protection type [IP]: |
 IP40 
|
| Standard: | DIN EN 60730 |
| Colour: |
 Grey 
|
| Manufacturer | Alre-IT |
| Herstellernummer | E6090328 |
| Weight [kg] | 0.7 |
| Customs tariff number | 90321080 (EEC) |
There are no questions available on this item yet