You are using an outdated browser. Please update your browser now to display the page correctly.
Fuel oil deaerator for single-pipe systems with return flow feed in oil-fired systems for continuous deaeration.
The automatic fuel oil deaerator with filter consists of a zinc die-cast housing,...
Fuel oil deaerator for single-pipe systems with return flow feed in oil-fired systems for continuous deaeration.
The automatic fuel oil deaerator with filter consists of a zinc die-cast housing, a filter cup and a deaerator hood made of transparent plastic. It is equipped with an integrated 50 µm Siku sieve and a shut-off valve. An additional safety float prevents oil foam from escaping through the deaeration opening. The deaerator is intended for single-pipe systems with return flow feed in oil-fired systems.
Malfunctions in the deaeration system can be easily detected through the transparent hood.
The fuel oil deaerator is water pressure-tight up to a water column of 10 m and can therefore also be used in areas liable to flooding.
Suitable for EL heating oil (DIN 51603-1), diesel fuel (EN 590), liquid fuels according to DIN SPEC 51603-6 and DIN/TS 51603-8 as well as bio heating oil and biodiesel with a maximum of 30% FAME (EN 14214).
| Scope of delivery: | |||
| 1 x | Heating oil de-aerator | ||
| 1 x | copper flat seal | ||
| 1 x | Hose connection with O-ring | ||
| 1 x | Wall bracket with fastening material | ||
| Spare parts: | |||
|
|
O-ring for fuel oil filter cup 3/8" - 1/2" |
|
|
|
|
Siku filter insert star-shaped for 3/8" fuel oil filters |
|
|
For more information see Downloads
| OEG no. | 116308350 |
| Housing: | Zinc die casting |
| Connection: | 3/8" |
| Nozzle capacity: | Max. 100 l/h |
| Operating pressure max. [bar]: | 0.7 |
| Return flow rate: | max. 120 l/h |
| Ambient temperature [°C]: | 60 |
| Operating temperature [°C]: | 60 |
| Width x Depth [mm]: | 165 x 99 |
| Height [mm]: | 221 |
| Manufacturer | Afriso |
| Manufacturer number | 69960 |
| Weight [kg] | 1.1 |
| Customs tariff number | 84818079 |
Le produit peut être installé au-dessus ou en dessous du niveau de remplissage maximal du réservoir
Non, cela n'est pas possible.
Convient pour le bio-fioul et le biodiesel avec max. 30% de FAME (EN 14214).
De stookoliefilters zijn in principe allemaal geschikt voor bovengrondse en ondergrondse tanks.
Bonjour,
Cet article n´existe pas en 1/4". Cependant, il y a des raccords à visser droit mâle 3/8'' x 8 mm avec filetage cylindrique réf Straight male stud fitting 3/8" ET | 8 mm ou des réductions FF/FM 1/4" x 3/8" avec hexagonal laiton nu réf 80200116.
Cordialement,
Votre équipe OEG
Le débit maximal de la buse est de 100 l/h et le débit de retour maximal est de 120 l/h.
Si, certo! è un articolo numero Siku filter insert round for 3/8" heating oil filters.
Per ulteriori informazioni relativi ai ordini può contattarci via nostro indirizzo email.
grazie mille e buona giornata
OEG TEAM.