Horizontal OEG hygienic storage tank for your customers' highest demands on potable water hygiene and efficiency!
The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks...
All product informationRelated products
Storage tanks A+
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Delivery by forwarding agency
Horizontal OEG hygienic storage tank for your customers' highest demands on potable water hygiene and efficiency!
The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and serves as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a flow heater.
The drinking water flows through the corrugated stainless steel pipe in the water of the heated tank only if required. This leads to a very low energy consumption and you can guarantee your customers legionella-free drinking water. You will not need a legionella protection programme in the regulation. At all times, customers are provided with hygienically-clean, fresh water at the desired temperature.
The horizontal arrangement of these hygienic storage tanks is ideal for the use in places that must be ruled out for vertical tanks (e.g. below inclined walls and stairs). Thus, your customers can benefit from the advantages of a hygienic storage tank even if space is limited.
Just compare! By positioning the heat exchangers horizontally in these storage tanks, you provide your customers with advantages over other products on the market. An efficient thermal stratification is only achieved by horizontal installation of the heat exchangers. The generously dimensioned heat exchanger surfaces ensure another energetic advantage over other products available on the market.
For more information see Downloads
| OEG no. | 516006332 |
| Colour: |
 Silver 
|
| Additional heat exchanger: | 0 |
| Installation type: | Horizontal storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| EAN | 4055668000349 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 200 |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 79 |
| Total height including insulation [mm]: | 700 |
| Width [mm]: | 610 |
| Length [mm]: | 1260 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 31 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
| Output capacity (45°C) [l]: | 115 |
| Performance indicator NL following DIN 4708: | 1,20 |
| Real volume according to EN 12897 [l]: | 206 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 2,50 |
| DHW heat exchanger volume [l]: | 11 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Connection layout: | front/rear |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | R 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 800 |
legionella element aanwezig??
Is bij deze soort boilers niet nodig
In de datasheet staat bij afvoer capaciteit 115 liter bij 45 ºC, wat betekend dit juist? Welke elektrische verwarmingsweerstand adviseren jullie voor deze 200liter boiler?
Hier adviseren wij uw een elektrische weerstand van 2kw tot max 3 kw
Zijn de aangegeven maatvoeringen inclusief isolstie
De opgegeven afmetingen zijn inclusief isolatie.