Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling...
Related products
10-year warranty
Delivery by forwarding agency
High Quality
TÜV Rheinland
Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling. The generously dimensioned heat exchanger surface that reaches down to the bottom ensures excellent heat transmission. A laterally positioned service hatch makes it possible to maintain and clean the storage tank conveniently, and it can be fitted with an electric heating element if required. The unrivalled OEG vacuum insulation of the storage tanks ensures there are significantly lower heat losses than the insulations of customary storage tanks.
For more information see Downloads
| OEG no. | 516008524 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Notes |
10-year warranty
Delivery by forwarding agency
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 1000 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 326 |
| Total height including insulation [mm]: | 2350 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 2280 |
| Heat retaining loss according to EN 12897 [W]: | 55 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,320 |
| Output capacity (45°C) [l]: | 1570 |
| Performance indicator NL following DIN 4708: | 41 |
| Real volume according to EN 12897 [l]: | 986 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 3,30 |
| Smooth-pipe heat exchanger volume bottom: | 21,30 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1 1/4" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 710 |
| Max. immersion depth of screw-in heater [mm]: | 800 |
Bonjour, quelle est la différence entre un ballon préparateur d'eau chaude et un ballon d'eau fraiche ?
Ballon d'eau chaude : Le réservoir est émaillé et une anode magnésium est nécessaire pour le protéger de la corrosion.
Ballon d'eau fraîche : il s'agit en fait d'un ballon tampon avec un tube ondulé en acier inoxydable intégré, qui sépare l'eau potable de l'eau de chauffage et sert également d'échangeur thermique.
Comme l'eau potable circule dans le tube ondulé en acier inoxydable, aucune anode n'est nécessaire.
kan ik deze boiler in warm/koud aansluiting 2" krijgen
Ja, zoals telefonisch besproken
le ballon est désormais classé A+ mais l'épaisseur d'isolant est de seulement 100mm d'après vos fiches techniques. Comment est-ce possible? Pouvez-vous communiquer vos mesures de performance énergétique?
envoyé par mail