Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling...
Related products
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling. The generously dimensioned heat exchanger surface that reaches down to the bottom ensures excellent heat transmission. A laterally positioned service hatch makes it possible to maintain and clean the storage tank conveniently, and it can be fitted with an electric heating element if required. The unrivalled OEG vacuum insulation of the storage tanks ensures there are significantly lower heat losses than the insulations of customary storage tanks.
| Spare parts: | ||
|
Magnesium anode Ø 33 x 500 mm 1 1/4" screw-in thread | |
|
Sealing disc EPDM for service hatch | |
For more information see Downloads
| OEG no. | 516008000 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 150 |
| Colour: | white |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 70 |
| Total height including insulation [mm]: | 1020 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1170 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 28 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,672 |
| Output capacity (45°C) [l]: | 236 |
| Performance indicator NL following DIN 4708: | 2,50 |
| Real volume according to EN 12897 [l]: | 154 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | inspection flange |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 420 |
kan ik ook een specificatie vinden
Goedemorgen,
De technische gegevens staan onder aan de pagina (Hot water storage tank 150 litres with 1 smooth pipe heat exchanger), de aansluitmaten en afmetingen zijn in de handleiding op pagina 59 te vinden, deze staat bij de downloads.
Wat zijn de afmetingen van de boiler, welke maat hebben de aansluitingen en wat is de capaciteit.
Goedemorgen,
De afmetingen van de opslagtank zijn: totale hoogte 1.020 mm (inclusief isolatie, omdat deze vast gemonteerd is), diameter 610 mm (inclusief isolatie)
Het laatste opslagvolume is 154 liter, het volume van de onderste gladde buiswarmtewisselaar is 7,5 m³, het volume van de gladde buiswarmtewisselaar is 1,15 m².
De aansluitmaten zijn allemaal 1 ", die voor het verwarmingselement 1 1/2" en de sensorhulzen zijn 6 mm. De afmetingen van de inspectieflens zijn Ø 150,8 x M12.
Hallo Kann ich diesen Speicher mit einer elektrischen Heizpatrone nachrüsten, um ihn auch mit Strom zu erwärmen und welchen Heizeinsatz würde ich dann benötigen ? Mfg Edgar Radermacher
Ja der Speicher kann mit einem Elektroheizstab ausgerüstet werden. Ich empfehle Ihnen einen dieser beiden.
Screw-in heater 1.0 kW mit 1kW Leistung oder Screw-in heater 2.0 kW mit 2kW Leistung.
Why do you need magnesium anod in the tank? Can it be supplied with a coil for air source heat pump? if yes what would be the price?
Hello,
The tank is made of steel from the inside and is emerald (coated). By constantly replenishing oxygenated water into the tank, the enamel is attacked. The sacrificial anode slowly dissolves and protects the enamel. Check the anode every 2-3 years after 5-7 years.
We have a lot of different tank specialy for air source heat pumps. You can find them quite easy by typing heat pump in the searchbar. Should you need any further information, please do not hesitate to contact us ons [email protected]
You have to be logged in to ask a question
26/02/2016, 20:46:58 of: Mr Sascha
Super
Super Qualität und Preisleistung des TWW!