HSSCo 5 machine taps M3-M12 and twist drills Ø 2.5-10.2 mm type C 245052
OEG no.: 311906844
OEG no. : 311906844
HSSE-Co machine taps and twist drills with 5 % cobalt content for drilling steel, brass, aluminium, bronze, plastic and cast iron. The drill is used for the processing of materials with high strength...
All product information Scope of deliveryHSSE-Co machine taps and twist drills with 5 % cobalt content for drilling steel, brass, aluminium, bronze, plastic and cast iron. The drill is used for the processing of materials with high strength and in long cutting channels with correspondingly strong heating. The cobalt content provides a higher heat resistance and higher stressing capacity.
| Scope of delivery: | |||
| 1 x | Metal case | ||
| 1 x | Machine tap DIN 371/376 Form C M3 | ||
| 1 x | Machine tap DIN 371/376 Form C M4 | ||
| 1 x | Machine tap DIN 371/376 Form C M5 | ||
| 1 x | Machine tap DIN 371/376 Form C M6 | ||
| 1 x | Machine tap DIN 371/376 Form C M8 | ||
| 1 x | Machine tap DIN 371/376 Form C M10 | ||
| 1 x | Machine tap DIN 371/376 Form C M12 | ||
| 1 x | Twist drill DIN 388 type N HSSE-Co Ø 2.5 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 3.3 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 4.2 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 5.0 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 6.8 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 8.5 mm | ||
| 1 x | Twist drill DIN 338 type N HSSE-Co Ø 10.2 mm | ||
| OEG no. | 311906844 |
| Material: | HSSE-Co 5 |
| Contents: | 14 pieces |
| Cutting direction: | Right-hand cut |
| Point angle [°]: | 60 |
| Application : | Steel , Brass, Aluminium, Bronze, Plastics, Cast iron |
| Manufacturer | Ruko |
| Manufacturer number | 245052 |
| Weight [kg] | 0.53 |
| Customs tariff number | 82051000 |
There are no questions available on this item yet