Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Delivery by forwarding agency
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
For more information see Downloads
| OEG no. | 516008235 |
| Smooth-pipeheatexchanger: | 0 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Notes |
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Delivery by forwarding agency
|
| Customs tariff number | 73090059 |
General
| Rated volume according to EN 12897: | 1000 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 265 |
| Total height including insulation [mm]: | 2350 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 2280 |
| Heat retaining loss according to EN 12897 [W]: | 55 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,320 |
| Output capacity (45°C) [l]: | 571 |
| Performance indicator NL following DIN 4708: | 6,40 |
| Real volume according to EN 12897 [l]: | 996 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 8 |
| DHW heat exchanger volume [l]: | 34 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 800 |
Passt der Frischwasserspeicher 1000 Liter durch eine Türe 81 cm breit, 195 cm hoch ? vielen Dank Manfred Dorsch
Der Speicher würde ohne Dämmung von der Bereite 79 cm durch die Tür passen, allerdings passt der Speicher von der Höhe nicht durch die Tür.
Die Gesamt Höhe des Speichers ist 235cm und das Kippmaß liegt bei 228 cm.