Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Delivery by forwarding agency
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
For more information see Downloads
| OEG no. | 516005296 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Also replaces | 516005294 |
| Notes |
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 1500 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 365 |
| Total height including insulation [mm]: | 2210 |
| Diameter without insulation [mm]: | 1000 |
| Diameter with insulation [mm]: | 1315 |
| Tilt height [mm]: | 2190 |
| Heat retaining loss according to EN 12897 [W]: | 63 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,512 |
| Output capacity (45°C) [l]: | 857 |
| Performance indicator NL following DIN 4708: | 8,40 |
| Real volume according to EN 12897 [l]: | 1464 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 8 |
| DHW heat exchanger volume [l]: | 34,20 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 4,50 |
| Smooth-pipe heat exchanger area top [m²]: | 2,80 |
| Smooth-pipe heat exchanger volume bottom: | 29,70 |
| Smooth-pipe heat exchanger volume top: | 18,60 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 1100 |
Kunnen er 3 stuks 3fase verwarmingselementen in op verschillende hoogtes?
De boiler heeft 2x een 1 1/2" aansluiting voor een elektrisch verwarmingselement (zie tekening, aansluiting M & P)
Wij producren de boilers in eigen fabriek en kunnen vrijwel elke gewenste boiler op maat voor u produceren.
Stuur hiervoor een aanvraag met uw specifieke wensen naar: [email protected]
U ontvangt dan z.s.m. een offerte en levertijd.
Zijn beide gladde buiswisselaars geschikt voor glycol als deze boiler als buffer wordt gebruikt voor "solar + cv ondersteuning" toepassingen. Buffer: CV Spiraal 1: Stookolieketel Spiraal 2: Solar installatie Inox buiswisselaar: SWW doorstroom.
Goedemorgen,
Ja dit kunt u zo doen.
je peux utiliser l'echangeur en moyen de chauffage par un recuperateur de chaleur type pac et utiliser le ballon de 1500 litres en stockage d'eau chaude sanitaire ?
Le réservoir lui-même n'est pas émaillé, seul le serpentin en acier inoxydable est adapté à l'eau potable.