Installation kit 3/4" for DN15 heat meters
OEG no.: 512242950
The installation kit is suitable for heat meters designed for direct measurement. The ball valve with injection point has a 3/4" female thread, the adaptor has a 3/4" male thread, and the screw fittings have a 1/2" male thread.
All product information Scope of deliveryRelated products
The installation kit is suitable for heat meters designed for direct measurement. The ball valve with injection point has a 3/4" female thread, the adaptor has a 3/4" male thread, and the screw fittings have a 1/2" male thread.
| Scope of delivery: | |||
| 1 x | Brass adaptor | ||
| 1 x | pair of screw joints | ||
| 2 x | Seal | ||
| 1 x |
Ball valve 3/4" IT with injection point M10 x 1 |
|
|
| OEG no. | 512242950 |
| Total length [mm]: | 110 |
| Design: | with 1 ball valve |
| Connection: | 3/4" |
| Suitable for screw connection: | 3/4" union nut |
| EAN | 4029376736302 |
| Also replaces |
|
| Weight [kg] | 1.1 |
| Customs tariff number | 84818081 |
Question
Le diamètre ¾ c'est pour le coté tuyau ou pour le coté compteur
Answer OEG:
Bonjour,
Les raccords à visser sont prévus pour le calorimètre et le raccord de tuyau. Le robinet à bille est installée dans le départ, car il enregistre la température du départ et la calcule dans le compteur par l'unité de mesure. C'est pourquoi le robinet à bille a également un filetage de 1" et le raccord de tuyau, ainsi que les raccords à visser, ont un filetage de 3/4".
Cordialement,
Votre équipe OEG