Press fitting coupling 32 mm TH profile
OEG no.: 802030008
The SilverTec® fitting allows for a quick assembly with maximum safety. Due to the forced leakage, unpressed joints can be already located reliably during the pressure test - the fitting is leaky when unpressed in the dimensions 16-32 mm...
All product informationRelated products
Press profile TH
press contour U
Suitable for surface and ceiling cooling
Suitable for surface and ceiling heating
Suitable for sanitary installation
Suitable for drinking water
unpressed untight
Suitable for oil-free compressed air applications up to 10 bar
Suitable for radiator connection
kiwa-certified
certified by DVGW
SilverTec
High Quality
The SilverTec® fitting allows for a quick assembly with maximum safety. Due to the forced leakage, unpressed joints can be already located reliably during the pressure test - the fitting is leaky when unpressed in the dimensions 16-32 mm.
The very good resistance coefficient (Zeta) guarantees low pressure loss. While in operation, hardly any flow noises occur. 3 control windows are used for a simple check of the insertion depth and provide for safety during the installation.
The fitting complies with the UBA positive list and fulfills the requirements of the drinking water ordinance. It has a multi-contour and is completely compatible with TH pressing jaws. It is also compatible with U profile pressing jaws up to the dimension 32 x 3 mm.
For more information see Downloads
| OEG no. | 802030008 |
| Design: | Coupling |
| Material: | Brass CW617N |
| Application: | Aluminium multilayer composite pipe |
| Pressure max. [bar]: | 10 |
| Press profile: | TH and U |
| Connection size: | 32 x 3 mm |
| Operating temperature max. [°C]: | 95 |
| Seal: | EPDM |
| Manufacturer | OEG |
| Brand | SilverTec® |
| EAN | 4055668010980 |
| Weight [kg] | 0.1 |
| Notes |
Press profile TH
press contour U
Suitable for surface and ceiling cooling
Suitable for surface and ceiling heating
Suitable for sanitary installation
Suitable for drinking water
unpressed untight
Suitable for oil-free compressed air applications up to 10 bar
Suitable for radiator connection
kiwa-certified
certified by DVGW
SilverTec
High Quality
|
| Customs tariff number | 74122000 (IT) |
Question
(Connection size: 16 x 2 mm)
Beste, kan je deze koppeling gebruiken voor vloerverwarming van het type: PE-RT 16x2 Type II ?
Answer OEG:
Goedemorgen,
In principe mag niets hiertegen spreken, maar deze fittingen zijn speciaal voor ons leidingsysteem geproduceerd. Dit betekent dat de verlengde garantie hier niet van toepassing meer is.
Question
(Connection size: 16 x 2 mm)
Bonjour, Est-ce que vos raccords peuvent être placés en chape ? Merci
Answer OEG:
Bonjour,
Il faut tout d´abord recouvrir les tuyaux et les joints avec de l'isolant avant de le placer en chape ou autre matériau de construction.
Question
(Connection size: 16 x 2 mm)
Goedemorgen, kun je deze koppelingen persen met een Rothenbergen Romax Compact voorzien van TH-persfitting?
Answer OEG:
Goedemiddag, ja dat gaat. Het hangt van de contour af. Het maakt dus met fittingen niet uit, maar wel met de persbekken.
Question
(Connection size: 16 x 2 mm)
Hallo, Dürfen die fittings mit fränkische alpex f50 Bakken gepresst werden? MfG
Answer OEG:
Nein. unsere Fittings haben ausschließlich eine Zulassung mit unseren Pressbacken und unserem Mehrschichtverbundrohr.
Question
(Connection size: 16 x 2 mm)
goede avond. Zijn deze ook te persen met een uponor perstang of is het beter een nieuwe tang aan te kopen.alvast bedankt
Answer OEG:
Belangrijk is op de Uponor persbekken ook een TH contour hebben.
Question
(Connection size: 16 x 2 mm)
You write for PEX and Pe-RT but the download certificate only says its approved for PE-RT ??!!
Answer OEG:
Dear Stefan,
you can use the fitting with different multi layer pipes. The DVGW is not able to test the fittings with all available pipes. For the test, they uses our pipes. But our customers use them with different pipes.
If you need the DVGW certificate for your customers you can use our multi layer pipe.
Question
(Connection size: 16 x 2 mm)
warum sind die blau und woran erkenne ich ob die für trink und Heizungswasser sind Kann Ich auch nur Die weisen bestellen
Answer OEG:
Guten Morgen,
Sie können diesen Artikel universal einsetzen, ob im Heizungs-, oder Sanitärbereich. Das Rohrsystem ist DVGW zertifiziert und auf dem Formstücken ist zum Teil ( DVGW ) eingestanzt. Es gab eine Änderung seitens Herstellers, deswegen wird es nur noch die blauen Formstücke geben. Die Farbe der Ringe ist egal, diese sind kompatibel untereinander und haben nix zu bedeuten.
Mit freundlichen Grüßen
Das OEG TEAM
Question
(Connection size: 16 x 2 mm)
Bonjour, 16mm est il le diametre intérieur ou extérieur du tuayx PERT ?
Answer OEG:
diametre exterieur
Question
(Connection size: 16 x 2 mm)
met welke persbek moet dit hulpstyk worden geperst met M of V bek
Answer OEG:
Met een persbek TH contour
Question
(Connection size: 16 x 2 mm)
Hi, can you get this fitting in 17x17mm? Thanks
Answer OEG:
We could get them. We send you an offer for 10 pieces.
You have to be logged in to ask a question
27/06/2016, 16:14:58 of: Mr Feld
gut
Eine sehr gute Pressfitting Kupplung 32 mm Top