Single-motor pressure storage unit for heating oil EL. The unit is installed close to the tank and supplies oil burners in great heights or in branched supply networks...
All product information Scope of deliveryRelated products
36 months warranty
Delivery by forwarding agency
Single-motor pressure storage unit for heating oil EL. The unit is installed close to the tank and supplies oil burners in great heights or in branched supply networks. The pressure is permanently monitored via electronic control with pressure sensor and automatically refilled when it drops. A pipe burst safety device is integrated. When the pressure drops below the minimum value, there is a safety switch-off. A leakage detector is integrated in the oil sump pan.
The capacity refers to the connected total burner capacity in kW.
The recommended pipe diameter of the suction pipe is 28 - 32 mm.
| Scope of delivery: | |||
| 4 x | transport bracket for floor mounting | ||
| 4 x | screw connection | ||
| 1 x |
Diaphragm pressure vessel 18 litres for oil supply systems |
||
| 1 x |
PST AC 1.0 pump control unit |
||
| 1 x |
Internal gear pump VBGG-DC 2 |
||
| 1 x |
Pressure gauge R 1/4" axial from 0 to 10 bar |
||
| 1 x |
Heating oil filter one-pipe Oilpur nickel filter both ends 1/2"IT isolation |
||
For more information see Downloads
| OEG no. | 120100440 |
| Type: | DE 12000 |
| Burner capacity max. [kW]: | 12,000 |
| Output max. [l/h]: | 1,200 |
| Pipe diameter [mm]: | 28 .. 32 |
| Connection size [inch]: | 3/4 |
| Voltage [V]: | 400 |
| Plug type: |
 Plug with earthing contact 
|
| Pressure min. [bar]: | 2.5 |
| Pressure max. [bar]: | 4 |
| Protection type [IP]: |
 IP54 
|
| Manufacturer | OEG |
| Weight [kg] | 54 |
| Notes |
36 months warranty
Delivery by forwarding agency
|
| Customs tariff number | 84136039 |