The repair case with MultiGebo compression fittings is suitable for multi-layer pipes in cold and hot water applications. The individual parts are ideal to connect, extend but also to reduce different multi-layer pipes...
All product information Scope of deliveryRelated products
Suitable for drinking water installations
The repair case with MultiGebo compression fittings is suitable for multi-layer pipes in cold and hot water applications. The individual parts are ideal to connect, extend but also to reduce different multi-layer pipes.
• Cut out the damaged part vertical to the axis of the pipe and deburr the inner and outer pipe.
• Measure the inner diameter of the pipe by using the gauge. Push the suitable support sleeves into both pipe ends up to the end. Place both nuts on the pipe ends.
• Put the grip rings on the pipe ends up to the end (audible click).
• Put the length-adjustable connector between the pipe ends and pull out the coupling till the chamber of the connection is fully connected with the grip ring.
• Fasten the nuts on the connector until the grip ring protrudes max. 1 to 2 mm out of the nut.
• Finally screw the middle nut with the connector solidly.
| Scope of delivery: | |||
| 1 x | Multigebo with length adjustment 20 x 20 mm | ||
| 2 x | Multigebo 20 mm x 3/4" ET | ||
| 4 x | support sleeve for inner diameter 14.4 mm | ||
| 4 x | support sleeve for inner diameter 15 mm | ||
| 4 x | support sleeve for inner diameter 15.5 mm | ||
| 4 x | support sleeve for inner diameter 16 mm | ||
| 1 x | gauge for inner diameter of 20 mm pipes | ||
| 2 x | reducing socket 1/2" It x 3/4" IT | ||
| 1 x | Multigebo with length adjustment 16 x 16 mm | ||
| 2 x | Multigebo 16 mm x 1/2" ET | ||
| 4 x | support sleeve for inner diameter 11.5 / 11.6 mm | ||
| 4 x | support sleeve for inner diameter 12.0 mm | ||
| 1 x | gauge for inner diameter of 16.0 mm pipes | ||
| OEG no. | 512003585 |
| Material: | Brass |
| Type: | Repair case |
| Connection: | 1/2" ET and 3/4" ET |
| Operating pressure [bar]: | 6 .. 10 |
| Pipe diameter [mm]: | 16, 20 |
| Temperature max. [°C]: | 95 |
| EAN | 4019576121596 |
| Weight [kg] | 2.9 |
| Notes |
Suitable for drinking water installations
|
| Customs tariff number | 74122000 |