Screw-in immersion heater with contactor 3.0 kW 012-4445

OEG no.: 517900205
  • Also replaces
    schließen Also replaces: 517900240 (Askoma Screw-in immersion heater AHR-H-C-3.0 3.0 kW for heating water)
Zoom Screw-in immersion heater with contactor 3.0 kW
OEG no. : 517900205

Immersion heater for the heating of drinking water or domestic water and heating water. The heater can also be used as emergency heating in case the heat generator fails or as booster heating for air/water heat pumps and solar systems...

All product information
Related products
Suitable for drinking water installations

Suitable for drinking water installations

Suitable for drinking water installations

Wipe 'n' Buy ®
Wipe 'n' Buy

OEG no. 517900205
Switching differential [K]: 11 ± 5.5
Material: Incoloy 825
Protection type [IP]: 41
Application: Drinking water, Heating water and DHW
Immersion depth [mm]: 400
Output [kW]: 3
Mounting type: Horizontal
Voltage [V]: 400V~
Connection: 1 1/2"
Ambient temperature [°C]: 50
Operating pressure max. [bar]: 10
Type of connection: Thread
Manufacturer Askoma
Manufacturer number 012-4445
Also replaces 517900240
Weight [kg] 2.75
Notes
Suitable for drinking water installations

Suitable for drinking water installations

Suitable for drinking water installations

Customs tariff number 85168080
en
Question:

J' ai un probleme de fonctionnement le voyant ne s'allume pas elle est branchée en 230 v sur borne N (neutre ) et 1 (phase ) que doit on branché en 2 ? merci de votre réponse

Answer OEG:

Avec 1 et N, on contrôle que la bobine du contacteur, mais on n'alimente pas les éléments de chauffe en courant.

2 et N sont sélectionnés lorsqu'un signal de commande externe indique que l'appareil est en marche.

Vous devez alimenter L1/L2/L3. Merci de voir le schéma de câblage.

You have to be logged in to ask a question

Average customer assessment
Bewertungen
en 11/11/2014, 08:06:40 of: Mr Andre Lammers

Gute Leistung - geringer Aufwand

Den 3,0 kW Tauchheizkörper verwende ich in 300,400 oder 500 liter Speichern. Innerhalb kurzer Zeit ist der Speicher auf Temperatur. Auch der Einbau ist schnell erledigt. Die Speicher die ich einbaue, haben in der Regel einen 1 1/2 Anschluss und somit brauche ich diesen nur reinschrauben und Strom anschließen. Kann ich nur empfehlen!

In order to give a review, you have to be logged in.