You are here:
-
Print
Technical data:
For heating oil EL
Maximum suction capacity: -0.95 bar
Filter including shut-off valve, vacuum gauge
1 ball valve, 1 internal gear pump...
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
Technical data:
For heating oil EL
Maximum suction capacity: -0.95 bar
Filter including shut-off valve, vacuum gauge
1 ball valve, 1 internal gear pump
1 standard motor, 1 check valve
Oil operating tank, working float switch, safety float switch
Temperature monitoring
Patented bypass forced lubrication of the pump
Filling and venting line connection
Pump control and monitoring unit “AC 1.0” based on microprocessor technology, with electronic motor current monitoring, pump alternation controlled by operating time, automatic fault switchover, integrated operating signal system with volt-free output for collective fault signal, built-in filter status indicator, solenoid valve
2 burner suction connections (more on request), factory-piped and fully wired ready for connection
Including steel drip tray with leak detector according to DIN 4736
Effective suction capacity: according to table
Suction connection: SRV DN 32
Burner suction connections: SRV 28
| Spare parts: | ||
|
Heating oil filter one-pipe 1 1/2" |
|
For more information see Downloads
| OEG no. | 120580100 |
| Output max. [l/h]: | 2,000 |
| Media: | Fuel oil EL |
| Voltage [V]: | 400 |
| Motor power [kW]: | 1.1 |
| Length x Width x Height [mm]: | 1,200 x 800 x 1,600 |
| Speed max. [1/min]: | 1,400 |
| Protection type [IP]: |
 IP54 
|
| Manufacturer | OEG |
| Weight [kg] | 254 |
| Notes |
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
|
| Customs tariff number | 84138100 |
Question:
OEG Einzelsaugaggregat VA2000 wir haben eine Sauglänge von ca. 160 Meter und Höhen ca. 4 Meter. Saugleitung wäre in Kupfer 15 mm. Aus diesem Aggregat würde die Entnahme über 2 kleine Aggregate an den Brennern erfolgen. Ist das möglich ?
Answer OEG:
Eine 15mm Leitung ist für das VA2000 deutlich zu klein. Das Aggregat wird seine Literleistung nicht erreichen. Aus einem größeren Aggregat mit anderen Saugagregaten weiter zu ziehen ist machbar. Der Volumenstrom des ersten Aggregates muß für alle Betriebszuständen groß genug gewählt werden.
