Solar absorber complete set up to 32 m² water surface

Enjoy the summer time in your own pool - little effort, low costs and maximum gain! Using solar energy when heating swimming pools is particularly inexpensive. Benefit from the solar absorber complete set for pools with a water surface of up to 32 m². This absorber system is easy to install and ready-to-use in no time.

Flat and tilted roof areas and lawns are suitable for the arrangement of the plastic absorbers. Completely made of plastic, they have the advantage of being operated in a single-circuit system. The chlorinated pool water can directly flow through the absorbers without system separation by means of a corrosion-resistant circulation pump or by the already existing circulation pump.

Scope of delivery:
1 x	PVC elbow 45°
1 x	PVC ball valve
1 x	Adhesive for PVC
8 x	Solar absorber side element with 2 couplings and 1 collecting pipe
8 x	Solar absorber middle element with 4 couplings
8 x	Solar connection hose with 2 stainless steel hose clamps
24 x	Solar absorber connection piece 25 mm
1 x	Solar connection kit for PVC piping
1 x	Solar vent set PVC tubing DN50
1 x	Solar drain kit PVC tubing DN50
1 x	T-piece 90° reduced 50 x 25 x 50 mm
1 x	Reducer 25 mm x 1/2" IT
1 x	T-piece 45° Ø 50 mm
1 x	PVC dirt filter Ø 50 mm sieve 1.8 mm with plastic sieve tube
1 x	OKU Suncontrol diff. temp. controller compl. with 2 sensors + immersion sleeve
1 x	Three-way ball valve Solar PVC Ø 50 mm with electric actuator 230 V

For more information see Downloads