Solar absorber complete set up to 40 m² water surface

OEG no.: 650001185
  • 20
Zoom Solar absorber complete set up to 40 m² water surface
OEG no. : 650001185

Enjoy the summer time in your own pool - little effort, low costs and maximum gain! Using solar energy when heating swimming pools is particularly inexpensive...

All product information Scope of delivery
Related products
Wipe 'n' Buy ®
Wipe 'n' Buy

Enjoy the summer time in your own pool - little effort, low costs and maximum gain! Using solar energy when heating swimming pools is particularly inexpensive. Benefit from the solar absorber complete set for pools with a water surface of up to 40 m². This absorber system is easy to install and ready-to-use in no time.

Flat and tilted roof areas and lawns are suitable for the arrangement of the plastic absorbers. Completely made of plastic, they have the advantage of being operated in a single-circuit system. The chlorinated pool water can directly flow through the absorbers without system separation by means of a corrosion-resistant circulation pump or by the already existing circulation pump.


Scope of delivery:
1 xPVC elbow 650001034
1 xPVC ball valve
2 xAdhesive for PVC
10 x Solar absorber side element with 2 couplings and 1 collecting pipe
10 x Solar absorber middle element with 4 couplings
10 x Solar connection hose with 2 stainless steel hose clamps
30 x Solar absorber connection piece 25 mm
1 x Solar connection kit for PVC piping
1 x Solar vent set PVC tubing DN50
1 x Solar drain kit PVC tubing DN50
1 x T-piece 90° reduced 50 x 25 x 50 mm
1 x Reducer 25 mm x 1/2
1 x T-piece 45° Ø 50 mm
1 x PVC dirt filter Ø 50 mm sieve 1.8 mm with plastic sieve tube
1 x OKU Suncontrol diff. temp. controller compl. with 2 sensors + immersion sleeve
1 x Three-way ball valve Solar PVC Ø 50 mm with electric actuator 230 V

For more information see Downloads


OEG no. 650001185
Flow rate: 150 up to 250 l m²/h
Surface: 40 m²
Temperature resistance [°C]: -50 .. 115
Operating pressure [bar]: 0 .. 1.2
Efficiency [%]: 85
Test pressure [bar]: 4.5
Property: Supports human weight
Load-bearing capacity: 400 kg
Number of collectors: 20
Pool capacity [m³]: 40
Absorber surface: 21.30 m²
Weight [kg] 0.01
Customs tariff number 84191900 (EEC)
Question:

Hi, for a 40m2 pool, how many panels would be required? And, where are the fixing brackets for these panels, how many would I need? Thanks

Answer OEG:

Hello,

this article is adequate for pools till 40 m² .

For flat- roof you need 3 pieces of art.

Best regards,

OEG Team

 

You have to be logged in to ask a question

No customer reviews yet

In order to give a review, you have to be logged in.