OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank is not only suitable for the heating of domestic water with boilers and low-temperature heating systems, but it is particularly suitable for the additional connection of a solar system...
All product informationRelated products
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
Delivery by forwarding agency
OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank is not only suitable for the heating of domestic water with boilers and low-temperature heating systems, but it is particularly suitable for the additional connection of a solar system. If not newly installed, then it is very often used as a replacement tank. Thanks to the wide range of selectable coating colours and the various connection options, a combination with heat generators and solar systems of almost any manufacturer is possible. The inner surface of the tank is coated with high-quality enamel to ensure the hygienic heating of drinking water. The generously dimensioned heat exchanger surface of the lower smooth-pipe heat exchanger reaches down to the bottom of the tank and, thus, provides a high energetic advantage compared to many other products in the market. The service hatch allows for convenient maintenance and cleaning of the tank.
| Suitable for: | ||
|
Solar package 2plus solar storage tank and 2 collector panels | |
For more information see Downloads
| OEG no. | 516008006 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| EAN | 4055668014940 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 200 |
| Colour: | white |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 90 |
| Total height including insulation [mm]: | 1265 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1375 |
| Heat retaining loss according to EN 12897 [W]: | 31 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
| Output capacity (45°C) [l]: | 315 |
| Performance indicator NL following DIN 4708: | 5 |
| Real volume according to EN 12897 [l]: | 200 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger area top [m²]: | 0,63 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 420 |
| Max. immersion depth of screw-in heater [mm]: | 400 |
Bonjour, pourriez vous me dire si on peut enlever l'isolation pour un passage très petit.merci
non car l´isolation en mousse est non amovible.
Bonjour, est il possible d'avoir le ballon sans isolation et si oui quelle sont ses côtes hauteur, diamètre Cordialement POEZEVARA Manuel
Non, ce ballon a une isolation en mousse non amovible. Veuillez nous faire parvenir le formulaire de demande pour ballons spéciaux dûment rempli. Nous avons ainsi la possibilité de produire un ballon selon les spécifications requises.