OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank is not only suitable for the heating of domestic water with boilers and low-temperature heating systems, but it is particularly suitable for the additional connection of a solar system...
All product informationRelated products
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank is not only suitable for the heating of domestic water with boilers and low-temperature heating systems, but it is particularly suitable for the additional connection of a solar system. If not newly installed, then it is very often used as a replacement tank. Thanks to the wide range of selectable coating colours and the various connection options, a combination with heat generators and solar systems of almost any manufacturer is possible. The inner surface of the tank is coated with high-quality enamel to ensure the hygienic heating of drinking water. The generously dimensioned heat exchanger surface of the lower smooth-pipe heat exchanger reaches down to the bottom of the tank and, thus, provides a high energetic advantage compared to many other products in the market. The service hatch allows for convenient maintenance and cleaning of the tank.
For more information see Downloads
| OEG no. | 516008025 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| EAN | 4055668015046 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 500 |
| Colour: | blue |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 168 |
| Total height including insulation [mm]: | 1770 |
| Diameter with insulation [mm]: | 760 |
| Tilt height [mm]: | 1925 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 43 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,032 |
| Output capacity (45°C) [l]: | 785 |
| Performance indicator NL following DIN 4708: | 18,92 |
| Real volume according to EN 12897 [l]: | 502 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,88 |
| Smooth-pipe heat exchanger area top [m²]: | 1,74 |
| Smooth-pipe heat exchanger volume bottom: | 12,40 |
| Smooth-pipe heat exchanger volume top: | 11 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 540 |
| Max. immersion depth of screw-in heater [mm]: | 600 |
Passt der Artikel "Einschraubheizkörper AHR-B-S 6,0 kW G 1 1/2" " in diesen Speicher ?
Hallo,
ja, das passt.