You are here:
-
Print
The suction pump if the suction power of the burner is not sufficient. The pump must only be installed in an easily accessible and monitorable
location inside a building. A drip pan underneath the pump is absolutely required...
The suction pump if the suction power of the burner is not sufficient. The pump must only be installed in an easily accessible and monitorable
location inside a building. A drip pan underneath the pump is absolutely required.
The suction pump is installed in the suction line of single-line systems. The vacuum must not exceed 0.4 bar, the velocity head is approx. 1 bar. The fittings at the oil burner must be pressure tight. (If required install pressure reducter and brass filter cup).
The pump is connected in parallel to the oil burner pump (supply cable requ ired)
Technical data:
- Voltage: 230 V - 50 Hz
- Consumption power: 30W
- Connection: 3/8" IT cyl.
- Delivery performance: 5 l/h at 4 m suction height
- Velocity head: approx. 1 bar
For more information see Downloads
| OEG no. | 120590080 |
| Weight [kg] | 1 |
| Customs tariff number | 84139100 (EEC) |
Question
Peut-on mettre cette pompe pour alimenter 2x poele au mazout ? Dois-je la raccorder juste après la citerne ?
Answer OEG:
La pompe d'aspiration 630.902 est destinée à soutenir les brûleurs à pulvérisation fioul (DIN 4787) dans le système monotube lorsque la puissance d'aspiration n'est plus suffisante.
La pompe d'aspiration doit être montée à l'intérieur de la conduite d'aspiration.
You have to be logged in to ask a question
26/10/2020, 20:03:29 of: Mr Miranda edwin
gaat hoog
heb hem gebruikt om mazout tot op de zolder te trekken, werkt perfect. Maar je moet hem aansluiten op de relais van de brander ( voeding brander motor) zodat hij ook stopt met pompen als de brander stopt. Niet op de brander voeding ! want als deze in storing valt blijft de pomp draaien terwijl de brander in veiligheid ligt.
12/02/2017, 13:52:40 of: Mr Feld
gut
Eine Zubringer Saugpumpe zu einem guten Preis
