Two-cylinder system with autom. changeover valve and remote ind.

50 mbar, 4 kg/h
for connection to gas cylinders, for pressure regulation
to the nominal pressure of the gas equipment
consisting of:
- high-pressure hose lines,
- pipe sections,
- automatic changeover device type AUV,
- low-pressure regulator with safety shut-off valve SAV
and safety relief valve PRV and screw fittings
Advantages and equipment
- the withdrawal takes place alternately, a cylinder change is possible without interrupting operation
- safety circuit: an integrated safety device prevents the gas flow from breaking through during cylinder change
- version with electronic remote display (operation/reserve) included
- remote indicator display (green/red) and transformer
- two-cylinder system version with RST 12 mm transition piece
- dispensing takes place alternately, cylinders can be changed without interrupting operation
- safety circuit: an integrated safety device prevents the gas flow from breaking through during cylinder change
- Four-cylinder system version with RST 12 mm transition piece
- Six-cylinder system version with RVS 15 mm transition piece

Approval
- Individual fittings DIN-DVGW or DVGW tested or EC type examination
Note
For the version with electronic remote display, the maximum cable length is
cable length is 25 m (cable cross-section 1.5 mm2).
The dimensioning and design of the liquid gas system (selection of gas
flow monitor, nominal flow rate, nominal diameter, etc.) must be carried out in accordance with TRF 2012.
The dimensioning and design of the liquefied gas system (selection of gas flow
flow monitor, nominal flow rate, nominal diameter etc.) must be carried out in accordance with the
TRF 2012.