The pressure reducing valve is DVGW-approved and noise-tested (class 1). The outlet pressure can be set from 1.5 to 6 bar. The valve has a sand-blasted stamped brass body, a spring hood made of impact-resistant plastic, a diaphragm and O-rings made of NBR...
All product information Scope of deliveryRelated products
certified by DVGW
Suitable for drinking water installations
The pressure reducing valve is DVGW-approved and noise-tested (class 1). The outlet pressure can be set from 1.5 to 6 bar. The valve has a sand-blasted stamped brass body, a spring hood made of impact-resistant plastic, a diaphragm and O-rings made of NBR. The indication of the spring pressure is on both sides, and when installed, a pressure gauge can be attached to the front side in flow direction to the left as well as to the right. Pressure gauges are not included.
Note:
Separately available pressure gauge with article number 310776640.
| Scope of delivery: | |||
| 2 x | Screw connection | ||
| 1 x | Pressure reducing valve | ||
For more information see Downloads
| OEG no. | 512242740 |
| Housing: | Brass |
| Control range [bar]: | 1.5 .. 6 |
| Type: | DRV 40 N |
| Total length [mm]: | 214 |
| Connection: | 1 1/2" |
| kv-value: | 13.8 m³/h |
| Pressure stage PN [bar]: | 16 |
| Operating temperature [°C]: | 30 |
| Manufacturer | Watts |
| Manufacturer number | 10015774 |
| EAN | 8019001038471 |
| Weight [kg] | 3.49 |
| Notes |
certified by DVGW
Suitable for drinking water installations
|
| Customs tariff number | 84811099 (IT) |