Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
For more information see Downloads
| OEG no. | 516008242 |
| Smooth-pipeheatexchanger: | 0 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Notes |
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
|
| Customs tariff number | 73090059 |
General
| Rated volume according to EN 12897: | 2250 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable PES fleece insulation 0.036 W/(mK) |
| Weight [kg]: | 341 |
| Total height including insulation [mm]: | 2165 |
| Diameter without insulation [mm]: | 1250 |
| Diameter with insulation [mm]: | 1450 |
| Tilt height [mm]: | 2240 |
| Output capacity (45°C) [l]: | 1142 |
| Performance indicator NL following DIN 4708: | 10 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 9 |
| DHW heat exchanger volume [l]: | 40 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 1100 |
quelles sont les dimensions
Les dimensions sont indiquées dans la fiche technique disponible à télécharger