Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
For more information see Downloads
| OEG no. | 516008120 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 500 |
| Colour: | white |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 168 |
| Total height including insulation [mm]: | 1770 |
| Diameter with insulation [mm]: | 760 |
| Tilt height [mm]: | 1925 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 43 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,032 |
| Output capacity (45°C) [l]: | 285 |
| Performance indicator NL following DIN 4708: | 3 |
| Real volume according to EN 12897 [l]: | 507 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 6 |
| DHW heat exchanger volume [l]: | 26,70 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,88 |
| Smooth-pipe heat exchanger area top [m²]: | 1,74 |
| Smooth-pipe heat exchanger volume bottom: | 12,40 |
| Smooth-pipe heat exchanger volume top: | 11,40 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 600 |
Bonjour, projet de rechauffage de l'eau sanitaire via un poele à bois equipé d'un echangeur et d'un syteme solaire, le puisage de l'ecs se fera via l'echangeur tube. la capcit" servira de tampon pour le bois et le solaire. ce ballon est il adapté ? bien cdlt
Bonjour,
En principe, le ballon peut être relié à un système solaire et à un poêle à bois. L'eau sanitaire serait ensuite chauffée à l'aide de l'échangeur thermique à tubes ondulés en acier inoxydable.
Comme les poêles à bois ont souvent un rendement relativement élevé, la taille de l'échangeur thermique peut ne pas être suffisante. Il est donc préférable de raccorder le poêle à bois directement au réservoir de stockage. Dans ce cas, un ballon HSP-1 serait théoriquement suffisant. Mais la meilleure façon de savoir si l'échangeur thermique est suffisant ou quelle serait la meilleure solution est de demander à l'installateur du poêle à bois.
Cordialement,
Votre équipe OEG
berijp ik dat de 500L die in de boiler zit alleen voor de verwarming is. Als ik mijn bad vul en twee douches tegelijk aan zet komt er dan wel genoeg warm water uit de boiler ?.
Ja, in deze boiler heeft uw 500 liter opslag voor verwarming en een drinkwaterspiraal. Als deze boiler op 60° verwarmt word, heeft uw een tapcapaciteit van ca. 380 tot 400 liter warmwater (40 °C) per uur.
Goedemorgen, een verswaterboiler werkt als een doorstroomverwarmer. Het aantal liter per minuut welke deze aan warm water kan leveren is afhankelijk van verschillende factoren (voornamelijk delta t, temperatuur van de boiler). Meer informatie hierover vindt u hier: Fresh-Water storage tank 500 litres with 2 smooth pipe heat exchangers. Mocht nog meer informatie willen ontvangen, aarzel niet om contact met ons op te nemen. (+31)