Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Consegna il prossimo giorno lavorativo
Il diritto di restituzione scade dopo 15 giorni
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
10 anni di garanzia
High Quality
Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
Fornitura: | |||
1 x | accumulatore acque chiare | ||
1 x | isolamento |
Per ulteriori informazioni consultare Download
Codice OEG | 516008336 |
Installation type: | Vertical storage tank |
Produttore | OEG |
Marchio | Pure+ |
Avvisi |
10 anni di garanzia High Quality Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua |
Codice doganale | 84191900 |
Capacità nominale a norma EN 12897: | 2600 |
Colore: | red |
Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | removable PES fleece insulation 0.036 W/(mK) |
Peso [kg]: | 500 |
Altezza totale con isolamento [mm]: | 2490 |
Diametro senza isolamento [mm]: | 1250 |
Diametro con isolamento [mm]: | 1450 |
Misura diagonale [mm]: | 2530 |
Portata (45 °) [l]: | 1480 |
Coefficiente di resa termica a norma DIN 4708: | 12 |
pmax Serbatoio [bar]: | 3 |
tmax Serbatoio [°C]: | 95 |
tmin Serbatoio [°C]: | 20 |
Scambiatore di calore per acqua potabile [m²]: | 9 |
Scambiatore di calore per acqua potabile volume [l]: | 39,50 |
pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
Scambiatore di calore a tubo liscio [quantità]: | 2 |
Scambiatore di calore a tubo liscio superficie inferiore [m²]: | 5,90 |
Scambiatore di calore a tubo liscio superficie superiore [m²]: | 4,60 |
Scambiatore di calore a tubo liscio volume in basso: | 39 |
Scambiatore di calore a tubo liscio volume in alto: | 30 |
pmax Scambiatore di calore a tubo liscio [bar]: | 10 |
tmax Scambiatore di calore a tubo liscio [°C]: | 130 |
Provvedimento di raccordi: | 90° |
Raccordo sonda [Ø mm / morsetto]: | 6 mm |
Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
Raccordo generatore di calore [filettatura]: | Rp 1 1/2" |
Raccordo scambiatore di calore [filettatura]: | Rp 1" |
Riscaldatore a vite con profondità massima a immersione [mm]: | 1300 |