Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Consegna il prossimo giorno lavorativo
Il diritto di restituzione scade dopo 15 giorni
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Accumulatori singoli A+
10 anni di garanzia
High Quality
Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua
TÜV Rheinland
La consegna tramite l'azienda spedizioni
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
Per ulteriori informazioni consultare Download
Codice OEG | 516008294 |
Installation type: | Vertical storage tank |
Produttore | OEG |
Marchio | Pure+ |
Classe di efficienza energetica | A+ |
ErP-Label | |
Avvisi |
Accumulatori singoli A+ 10 anni di garanzia High Quality Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua TÜV Rheinland La consegna tramite l'azienda spedizioni |
Codice doganale | 84191900 |
Capacità nominale a norma EN 12897: | 300 |
Colore: | silver |
Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | solid foamed insulation |
Peso [kg]: | 110 |
Altezza totale con isolamento [mm]: | 1750 |
Diametro con isolamento [mm]: | 610 |
Misura diagonale [mm]: | 1830 |
Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
Perdita termica secondo EN 12897 [W]: | 36 |
Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 0,864 |
Portata (45 °) [l]: | 175 |
Coefficiente di resa termica a norma DIN 4708: | 1,60 |
Volume effettivo conforme alla norma EN 12897 [l]: | 294 |
pmax Serbatoio [bar]: | 3 |
tmax Serbatoio [°C]: | 95 |
tmin Serbatoio [°C]: | 20 |
Scambiatore di calore per acqua potabile [m²]: | 4,40 |
Scambiatore di calore per acqua potabile volume [l]: | 19,30 |
pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
Scambiatore di calore a tubo liscio [quantità]: | 2 |
Scambiatore di calore a tubo liscio superficie inferiore [m²]: | 1,15 |
Scambiatore di calore a tubo liscio superficie superiore [m²]: | 0,77 |
Scambiatore di calore a tubo liscio volume in basso: | 7,50 |
Scambiatore di calore a tubo liscio volume in alto: | 5,05 |
pmax Scambiatore di calore a tubo liscio [bar]: | 10 |
tmax Scambiatore di calore a tubo liscio [°C]: | 130 |
Provvedimento di raccordi: | 180° |
Raccordo sonda [Ø mm / morsetto]: | 6 mm |
Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
Raccordo generatore di calore [filettatura]: | R 1" |
Raccordo scambiatore di calore [filettatura]: | Rp 1" |
Raccordo resistenza elettrica [filettatura]: | Rp 1 1/2" |
Riscaldatore a vite con profondità massima a immersione [mm]: | 500 |
Beste, we hebben geen uitgebreide diagrammen voor de capaciteit van de warmtewisselaars. Maar er is wel het bulkvermogen aangegeven. Dit is een normgetal die aangeeft hoeveel liters water je uit de boiler haalt tot dat de temperatuur naar 45°C gedaald is wanneer de boiler eerst 60°C heeft, naarstromend water 10°C en de boiler niet naverwarmd wordt. Bij deze boiler zijn dat dan 175l. Dus indien je de boiler standaard op 80°C hebt staan dan is dat ruim voldoende voor een douche en een keuken tegelijk.
Een hydraulisch schema van mijn situatie zie ik niet op blz. 1108-1109, te weten woonkamer een houtkachel gekoppeld, c.v. voor verwarmen naar ketel op zolder, warmwater voorverwarmd naar c.v.-ketel op zolder, in de serre nabij het buffervat een vloerverwarming deze voeden uit buffervat. Is hiervoor een optie beschreven?
Om u van dienst te kunnen zijn hebben wij een schets nodig van het hydraulische schema hoe u installatie is opgebouwd. U kunt dit sturen naar: [email protected]