Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Consegna il prossimo giorno lavorativo
Il diritto di restituzione scade dopo 15 giorni
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Accumulatori singoli A+
10 anni di garanzia
Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua
TÜV Rheinland
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
compatibile con: | ||
Kit solare 4plus su tetto 500 l accumulatore acuqa fresca 4 collettori | ||
Kit solare 4plus® tetto piano 500 l accumulatore acqua fresca 4 collettori |
Per ulteriori informazioni consultare Download
Codice OEG | 516005288 |
Installation type: | Vertical storage tank |
Produttore | OEG |
Marchio | Pure+ |
Classe di efficienza energetica | A+ |
ErP-Label | |
Avvisi |
Accumulatori singoli A+ 10 anni di garanzia Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua TÜV Rheinland |
Codice doganale | 84191900 |
Capacità nominale a norma EN 12897: | 500 |
Colore: | silver |
Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | solid foamed insulation |
Peso [kg]: | 168 |
Altezza totale con isolamento [mm]: | 1770 |
Diametro con isolamento [mm]: | 760 |
Misura diagonale [mm]: | 1925 |
Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
Perdita termica secondo EN 12897 [W]: | 43 |
Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 1,032 |
Portata (45 °) [l]: | 285 |
Coefficiente di resa termica a norma DIN 4708: | 3 |
Volume effettivo conforme alla norma EN 12897 [l]: | 507 |
pmax Serbatoio [bar]: | 3 |
tmax Serbatoio [°C]: | 95 |
tmin Serbatoio [°C]: | 20 |
Scambiatore di calore per acqua potabile [m²]: | 6 |
Scambiatore di calore per acqua potabile volume [l]: | 26,70 |
pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
Scambiatore di calore a tubo liscio [quantità]: | 2 |
Scambiatore di calore a tubo liscio superficie inferiore [m²]: | 1,88 |
Scambiatore di calore a tubo liscio superficie superiore [m²]: | 1,74 |
Scambiatore di calore a tubo liscio volume in basso: | 12,40 |
Scambiatore di calore a tubo liscio volume in alto: | 11,40 |
pmax Scambiatore di calore a tubo liscio [bar]: | 10 |
tmax Scambiatore di calore a tubo liscio [°C]: | 130 |
Provvedimento di raccordi: | 180° |
Raccordo sonda [Ø mm / morsetto]: | 6 mm |
Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
Raccordo generatore di calore [filettatura]: | R 1" |
Raccordo scambiatore di calore [filettatura]: | Rp 1" |
Raccordo resistenza elettrica [filettatura]: | Rp 1 1/2" |
Riscaldatore a vite con profondità massima a immersione [mm]: | 600 |
De afmetingen van de boilers staan op onze site bij het betreffende product onder: "alle productinformatie" en "downloads"
Accumulatore acqua fresca 500 litri con 2 scambiatori di calore a tubo liscioAccumulatore acqua fresca 500 litri con 2 scambiatori di calore a tubo liscio
Hallo, der 516005460 zeigt eine Pufferspeicher. Das Kippmaß ist angegeben. Ist das das Maß mit oder ohne Isolierung? Mit Iso würde es hinkommen, ohne Iso würde es mich wundern. Vielen Dank, a. Germer
Das Kippmaß ist mit Isolierung.
Natuurlijk is het mogelijk, gewoon een mail sturen aan [email protected]
Bei folgenden unserer Speicher ist die Isolierung fest eingeschäumt: 80 - 500 Liter.
Toutes les informations se trouve dans la fiche technique disponible à télécharger.
Bonjour,
La profondeur maximum d'immersion est de 400 mm. Vous pouvez p.ex. prendre la référence
Cordialement,
Votre équipe OEG
Bonjour,
La notice de montage se trouve sous ''Downloads''
Cordialement,
Votre équipe OEG
Aufgrund der geringen Temperaturdifferenz ergibt sich eine Schüttleistung von ca. 70 l/h. Wir raten unsererseits von dieser Lösung ab.