Fulfill your customers' highest demands on the hygiene of drinking water and efficiency - with the horizontal OEG built-under hygienic storage tanks!
The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks...
Tutte le informazioni sul prodottoProdotti simili
Accumulatori singoli A+
10 anni di garanzia
High Quality
Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua
Fulfill your customers' highest demands on the hygiene of drinking water and efficiency - with the horizontal OEG built-under hygienic storage tanks!
The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and serves as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of flow heater.
The drinking water flows through the corrugated stainless steel pipe in the water of the heated tank only if required. This leads to a very low energy consumption, and you can guarantee your customers legionella-free drinking water. You will not need a legionella protection programme in the regulation. At all times, the consumer has hygienically-clean, fresh water at their desired temperature.
Due to the very solid, powder-coated steel sheet casing, the storage tank is particularly suitable as a built-under storage tank for all kinds of oil and gas condensing boilers of almost any manufacturer. The extremely sturdy construction allows loads up to 500 kg.
The horizontal arrangement of these hygienic storage tanks is ideal for the use in places that must be ruled out for vertical (standing) tanks (e.g. below inclined walls and stairs). Thus, your customers can benefit from the advantages of a hygienic storage tank even if space is limited.
Just compare! Due to the horizontal arrangementof the heat exchangers in the OEG hygienic storage tanks, you offer your customers advantage over other products in the market. Only due to the horizontal installation of the heat exchangers, an efficient thermal stratification is achieved. The generously dimensioned heat exchanger surfaces provide for another energetic advantage over other products available in the market.
Due to the two additional heat exchangers, you offer your customer the option to use more heat generators and to feed their energy into the hygienic storage tanks.
Per ulteriori informazioni consultare Download
| Codice OEG | 516006477 |
| scambiatore di calore addizionale: | 2 |
| Installation type: | Built-under storage tank horizontal |
| Produttore | OEG |
| Marchio | Pure+ |
| EAN | 4055668001759 |
| Classe di efficienza energetica | A+ |
| ErP-Label |
|
| Avvisi |
Accumulatori singoli A+
10 anni di garanzia
High Quality
Generazione d'acqua dolce in tubo corrugato in acciaio Inox secondo il principio di funzionamento dello scaldacqua
|
| Codice doganale | 84191900 |
Generale
| Capacità nominale a norma EN 12897: | 150 |
| Colore: | white |
| Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | solid foamed insulation |
| Peso [kg]: | 128 |
| Altezza totale con isolamento [mm]: | 680 |
| Larghezza [cm]Larghezza [mm]: | 625 |
| Lunghezza [mm]Lunghezza [cm]: | 1035 |
| Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
| Perdita termica secondo EN 12897 [W]: | 29 |
| Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 0,696 |
| Portata (45 °) [l]: | 85 |
| Coefficiente di resa termica a norma DIN 4708: | 1 |
| Volume effettivo conforme alla norma EN 12897 [l]: | 155 |
| pmax Serbatoio [bar]: | 3 |
| tmax Serbatoio [°C]: | 95 |
| tmin Serbatoio [°C]: | 20 |
| Scambiatore di calore per acqua potabile [m²]: | 2,10 |
| Scambiatore di calore per acqua potabile volume [l]: | 9,60 |
| pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
| tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
| Zusatzwärmetauscher Fläche unten [m²]: | 1,40 |
| Zusatzwärmetauscher Fläche oben [m²]: | 1,40 |
| Zusatzwärmetauscher Volumen oben: | 6,10 |
| Zusatzwärmetauscher Volumen unten: | 6,20 |
| pmax Zusatzwärmetauscher [bar]: | 6 |
| tmax Zusatzwärmetauscher [°C]: | 95 |
| Provvedimento di raccordi: | front/rear |
| Raccordo sonda [Ø mm / morsetto]: | 6 mm |
| Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
| Raccordo generatore di calore [filettatura]: | R 1" |
| Raccordo resistenza elettrica [filettatura]: | Rp 1 1/2" |
| Riscaldatore a vite con profondità massima a immersione [mm]: | 700 |