Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Consegna il prossimo giorno lavorativo
Il diritto di restituzione scade dopo 15 giorni
OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating up domestic water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system...
Tutte le informazioni sul prodottoAccumulatori singoli A+
10 anni di garanzia
High Quality
TÜV Rheinland
OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating up domestic water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system.
The third smooth-pipe heat exchanger can be perfectly used for a return flow boost.
The storage tank is used as a new installation but also very often as a replacement tank. Thanks to the wide range of selectable coating colours and the various connection options, a combination with heat generators and solar systems of almost any manufacturer is possible.
The inner surface of the storage tank is coated with high-quality enamel to ensure the hygienic heating of drinking water. The generously-dimensioned heat exchanger surface of the lower smooth-pipe heat exchanger reaches down to the bottom of the tank, and thus provides a huge energetic advantage compared to many other products in the market.
The service hatch allows for convenient maintenance and cleaning of the tank.
Per ulteriori informazioni consultare Download
Capacità nominale a norma EN 12897: | 300 |
Colore: | red |
Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | solid foamed insulation |
Peso [kg]: | 134 |
Altezza totale con isolamento [mm]: | 1750 |
Diametro con isolamento [mm]: | 610 |
Misura diagonale [mm]: | 1830 |
Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
Perdita termica secondo EN 12897 [W]: | 35 |
Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 0,840 |
Portata (45 °) [l]: | 471 |
Coefficiente di resa termica a norma DIN 4708: | 10 |
Volume effettivo conforme alla norma EN 12897 [l]: | 290 |
pmax Serbatoio [bar]: | 10 |
tmax Serbatoio [°C]: | 95 |
tmin Serbatoio [°C]: | 20 |
Scambiatore di calore a tubo liscio [quantità]: | 3 |
Scambiatore di calore a tubo liscio superficie inferiore [m²]: | 1,15 |
Scambiatori di calore a tubo liscio superficie centrale [m²]: | 1,15 |
Scambiatore di calore a tubo liscio superficie superiore [m²]: | 0,77 |
Scambiatore di calore a tubo liscio volume in basso: | 7,50 |
Scambiatori di calore a tubo liscio volume centrale: | 7,50 |
Scambiatore di calore a tubo liscio volume in alto: | 5,05 |
pmax Scambiatore di calore a tubo liscio [bar]: | 10 |
tmax Scambiatore di calore a tubo liscio [°C]: | 130 |
Provvedimento di raccordi: | 180° |
Raccordo sonda [Ø mm / morsetto]: | 6 mm |
Attacchi per prelievo acqua calda/fredda: | R 1" |
Raccordo scambiatore di calore [filettatura]: | Rp 1" |
Raccordo circolazione: | R 3/4" |
Raccordo resistenza elettrica [filettatura]: | Rp 1 1/2" |
Flangia di revisione (LK 150): | 115 / 180 |
Riscaldatore flangia di profondità massima a immersione [mm]: | 420 |
Riscaldatore a vite con profondità massima a immersione [mm]: | 500 |