The compression fitting Multigebo with length adjustment is the perfect repair solution for multi-layer pipes. Thanks to the modular construction system, it is ideally suited to connect different multi-layer pipes...
All product information Scope of deliveryRelated products
Suitable for drinking water installations
The compression fitting Multigebo with length adjustment is the perfect repair solution for multi-layer pipes. Thanks to the modular construction system, it is ideally suited to connect different multi-layer pipes. Moreover, it can be used for cold water and hot water applications.
• Cut out the damaged part vertical to the axis of the pipe and deburr the inner and outer pipe.
• Measure the inner diameter of the pipe by using the gauge. Push the suitable support sleeves into both pipe ends up to the end. Place both nuts on the pipe ends.
• Put the grip rings on the pipe ends up to the end (audible click).
• Put the length-adjustable connector between the pipe ends and pull out the coupling till the chamber of the connection is fully connected with the grip ring.
• Fasten the nuts on the connector until the grip ring protrudes max. 1 to 2 mm out of the nut.
• Finally screw the middle nut with the connector solidly.
| Scope of delivery: | |||
| 1 x | Multigebo 16 x 16 mm with length adjustment | ||
| 2 x | support sleeve 11.5 - 11.6 mm | ||
| 2 x | support sleeve 12.0 mm | ||
| 1 x | gauge for measuring the inner diameter | ||
| OEG no. | 512003581 |
| Material: | Brass |
| Type: | Clamp connector for length compensation |
| Operating pressure [bar]: | 6 .. 10 |
| Pipe diameter [mm]: | 16 |
| Temperature max. [°C]: | 95 |
| EAN | 4019576121817 |
| Weight [kg] | 0.49 |
| Notes |
Suitable for drinking water installations
|
| Customs tariff number | 74122000 |