OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating up domestic water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system...
All product informationRelated products
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
OEG Solar storage tanks - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating up domestic water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system.
The third smooth-pipe heat exchanger can be perfectly used for a return flow boost.
The storage tank is used as a new installation but also very often as a replacement tank. Thanks to the wide range of selectable coating colours and the various connection options, a combination with heat generators and solar systems of almost any manufacturer is possible.
The inner surface of the storage tank is coated with high-quality enamel to ensure the hygienic heating of drinking water. The generously-dimensioned heat exchanger surface of the lower smooth-pipe heat exchanger reaches down to the bottom of the tank, and thus provides a huge energetic advantage compared to many other products in the market.
The service hatch allows for convenient maintenance and cleaning of the tank.
For more information see Downloads
| OEG no. | 516005170 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| EAN | 4055668014841 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 300 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 134 |
| Total height including insulation [mm]: | 1750 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1830 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 35 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,840 |
| Output capacity (45°C) [l]: | 471 |
| Performance indicator NL following DIN 4708: | 10 |
| Real volume according to EN 12897 [l]: | 290 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 3 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger surface middle [m²]: | 1,15 |
| Smooth-pipe heat exchanger area top [m²]: | 0,77 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| Smooth-pipe heat exchanger volume middle: | 7,50 |
| Smooth-pipe heat exchanger volume top: | 5,05 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 420 |
| Max. immersion depth of screw-in heater [mm]: | 500 |
Beste, kan ik de technische fische ontvangen van de OEG solarboilers?
Goedemorgen,
deze kunt u in het downloadgedeelte van de boiler openen.
Welke solarvloeistof dient hierbij gebruikt te worden? Mvg Maxime
Het soort vloeistof wordt bepaald door het soort collectoren.
Bij plaatcollectoren Solar fluid FK 30 ready-to-use mix mixable with Tyfocor® L of Solar fluid FK 50 concentrate mixable with Tyfocor® L (concentraat)
Bij buiscollectoren Solar fluid RK 30 ready-to-use mix mixable with Tyfocor® LS
Guten Tag, Wie ist es möglich, mit nur 60 mm Isolierung, auf einen so niedrigen Wärmeverlust zu kommen? Freundliche Grüsse, Niels Lyck
Guten Morgen,
wir haben ein Verfahren entwickelt, durch dieses werden die Speicher nun eingeschäumt. Durch dieses Verfahren
und das verwendete Material ist es uns gelungen den Wärmeverlust nochmals zu senken.
Mit freundlichen Grüßen
Das OEG TEAM
Abmessungen des Speichers
Hallo, diese und weitere Informationen zu dem Speicher finden Sie in unserem Webshop im Bereich Download. Viele Grüße.
You have to be logged in to ask a question
07/11/2014, 14:38:19 of: Mr Carlini
OK
Mon seul probleme c'est avoir la bonne resistance chauffante, anode est en plein dans le chezmin